How to build your first social media automation without code

By Ranjit Bhinge, founder of Blur Studio · Updated · 9 min read

Short answer: Start with one small automation: when you publish a blog post, a draft post appears in a spreadsheet, you edit it and change one cell to "Ready to Post", and a second automation then posts it through Blotato, a software subscription that schedules and publishes social media posts. Build it in Make or n8n, two no-code tools that join apps on a visual canvas. The approval step is the cell you change by hand. Blotato's API needs a paid plan from $29 a month, billed monthly, as of November 2026.

Ranjit Bhinge

Your first automation should do one boring job, and it should never post anything you have not looked at. Here is a build with a human approval step in the middle, which many tutorials skip.

I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.

An automation is a chain of steps that runs by itself. It has a trigger (the event that starts it, such as "a new blog post appeared") and one or more actions (what happens next, such as "add a row to a sheet" or "publish a post"). A no-code tool, such as Make or n8n, lets you build the chain by dragging boxes and filling in fields instead of writing programs.

The risk with a first automation is that it works too well. A chain that posts the moment a blog post goes live will also post the typo, the wrong link and the half-finished draft. So this build has two parts with a person in between. Nobody at Blur Studio has built this exact chain. It comes from Blotato's help centre, Make's and n8n's pricing pages, and common practice, all checked on 21 November 2026. Treat it as a plan you test.

This page may contain affiliate links from which Blur Studio earns commissions.

Start with one step: new blog post to social drafts

Pick the smallest useful job. A good first one is: "When I publish a blog post, make a draft social post for it." Here is why it is a good start:

  • It uses your own content, so there is no copyright or accuracy worry.
  • It runs a few times a week, so mistakes are cheap and easy to see.
  • The trigger is simple. Almost every blog has an RSS feed (a web address that lists your newest posts for other software to read).

Avoid these as a first job: anything that replies to people, anything built on other people's content, and anything that posts to many platforms at once. Later pages in this series cover them.

The design: two small automations and one human step

PartWhat it doesWho
Automation AWatches your blog's feed. For each new post, adds a row to a Google Sheet with Status "Draft", the title, the link and a draft textThe tool
ApprovalYou open the sheet, fix the text, and change Status to "Ready to Post"You
Automation BEvery few hours, looks for one row marked "Ready to Post", publishes it through Blotato, records the result and sets StatusThe tool

The Status cell is your approval switch. Nothing is posted until you change it. That is the whole point. It also gives you a record of what was approved.

Blotato templates for beginners

You do not have to start from a blank canvas. Blotato publishes templates in its help centre, and as of November 2026 the index lists nine, numbered 1 to 5, 7, 8, 10 and 11. Two suit a beginner:

  • Post Everywhere (template 1). It reads a Google Sheet, finds the row marked "Ready to Post", publishes it to nine of Blotato's 11 platforms, and writes "Posted". It runs every 3 hours and takes one row per run. It is available for n8n and Make. It needs Google Sheets and either a public Google Drive folder or an S3 storage bucket for media. This is the closest match to the design above. Blotato's own author advises a human review before a row is marked "Ready to Post", especially for beginners.
  • Build Your First AI Automation (template 11). It teaches the steps of reading a source, making content, reviewing it and publishing with a completion check. It is written for n8n, and for Make the guide plus Blotato's API reference apply.

The order "11 then 1" is my suggestion. Blotato's docs do not rank the templates. Templates are not one-click. You still install nodes or modules, add keys and map columns. For detail on all nine, see the templates explained. If you build in n8n, the n8n node setup guide covers the install, and the Make guide covers Make.

Before you pay: the trial trap

Blotato's 7 day free trial includes the web app but not the API. The tools above talk to Blotato through an API key. Blotato says that creating a key during the trial ends the trial at once and starts the paid plan, which it says is Starter at $29 a month, billed monthly, as of November 2026. A warning appears first. So:

  1. Use the trial to learn the web app and post a few things by hand.
  2. Decide whether you will keep posting this way, and build your sheet and approval habit in the meantime.
  3. Only then choose a plan and create the key.

See what the trial includes.

Build steps

These steps use Make. The same logic works in n8n. Module names can change, so use the names shown in your own account. Blotato's Make app offers actions only, with no triggers, so each scenario starts from a different trigger, such as the feed or a schedule. For anything the Blotato module lacks, Make's generic web request module can call the Blotato API directly.

  1. Make the sheet. Columns: ID, Status, Platform, Text, Link, Media URL, Submission ID, Result, Approved by. Keep the names fixed, because templates and your steps depend on them.
  2. Build Automation A. Trigger: an RSS module watching your blog feed. Action: a Google Sheets module that adds a row with Status "Draft", the title, the link and a plain draft such as "New on the blog: title, then the link". Add an AI writing step later, once the plain version works.
  3. Run A once. Publish or republish a test post. Check that exactly one row appears. Pass: one row. Fail: none, or duplicates.
  4. Connect Blotato. In Make, add the Blotato connection and paste the API key into the connection screen, never into text fields or notes. Connect your social accounts in Blotato first. Use a spare or low-key account for tests.
  5. Build Automation B. Trigger: a schedule, every 3 hours as Blotato's template does. First action: a Google Sheets search for rows where Status equals "Ready to Post", limited to one row. Second: Blotato, Create a Post, with the platform, account and text from the row. Third: update the row with Status "Submitted" and the submission ID that Blotato returns.
  6. Add the check. Blotato publishes as queued work. A create call returning does not prove the post is live. Blotato has no webhook (an automatic message sent to your tool) for post results, so a later run asks for the status using the saved ID. Wait at least 10 seconds between checks. Mark the row "Posted" only when the status is published, and "Failed" with the error text when it is failed. A scheduled post is not yet posted. If the Make module has no status action, use the generic web request module to call GET /v2/posts/ID.
  7. Test with one platform. Turn off every platform route but one, as Blotato's template advises.

Check and approve before posting

Blotato has no approval feature for outside software. Its docs say that posting through the API publishes or schedules at once, and that scheduling is not a hold. So your gate must sit in your own chain. The sheet's Status cell is the simplest. Rules that make it a real gate:

  • Only you can edit the Status column. Share the sheet read-only with anyone else.
  • Automation B can post only rows with Status exactly "Ready to Post". Anything else is skipped.
  • If you change the text after approving, set the Status back to "Draft" and approve again.
  • Write the approver's name and date in the Approved by column.

When you outgrow the sheet, you can add a Slack or email approval step. Both n8n and Zapier offer built-in ways to wait for a reviewer's answer. See building an approval step in n8n or Make.

Cost and limits

You will pay for Blotato, and possibly for the builder. Prices are in US dollars as of November 2026 unless a line says euros.

  • Blotato. Starter $29 a month, billed monthly, with 20 connected accounts and 200 queued scheduled posts. Publishing and the API cost no credits. Credits are spent only on AI images and AI video. See Blotato's pricing page.
  • Make. Make's free plan gives 1,000 credits a month, with a minimum 15 minute gap between runs. Make counts most module actions as 1 credit. On Make's pricing page with monthly billing at 10,000 credits a month, Core costs $10.59 a month.
  • n8n. n8n Cloud Starter shows 20 euros a month billed annually, for 2,500 workflow runs, and counts each full run as one regardless of steps. A self-hosted copy has no n8n fee but needs a server. Euros are not converted to dollars.

Worked example with made-up numbers. Automation B runs every 3 hours, so 8 times a day, or about 240 a month. Most runs find nothing to post, but each still uses a trigger and a sheet search, roughly 2 credits by Make's rule of 1 credit per module action. That is about 480 credits a month before any post. A real post adds roughly 3 more credits (the Blotato action, the sheet update and the check). Ten posts a month adds about 30, so around 510 credits, inside the free 1,000. These are estimates from Make's stated rule, not a quote. Check how Make counts a run that finds no rows.

Limits that matter: one row per run keeps volume low. If you approve 20 rows, they post over about 60 hours at one row every 3 hours. Make the interval shorter only when you are ready.

Test plan with pass and fail

TestPassFail
New blog postOne draft row, Status "Draft"No row or two rows
Nothing approvedAutomation B runs and posts nothingAny post goes out
One row approvedOne post, on the right account, ID savedWrong account or no ID
Re-run B immediatelyThe row is skippedA second post appears
Bad row (blank text)Row marked Failed with the errorMarked Posted, or retried again and again
Status checkRow becomes Posted only after publishedMarked Posted on "scheduled"

Log line to copy: Date | Scenario | Row ID | Platform | Submission ID | Final status | Error | Fix

Who should skip this, and when not to use Blotato

  • You publish fewer than about 5 posts a week. Doing it by hand in a scheduler's own screens will cost you less time than building this.
  • You post to one platform only. A scheduler with a free plan may be enough. See alternatives with a free plan.
  • You want a client to approve each post by clicking a link. Blotato has no such feature, and a sheet is not a client-friendly gate.
  • You do not want to pay for a month to test the API.

How this page was checked

The facts come from Blotato's help centre pages on its templates, the Make app, API authentication, rate limits and billing, from Blotato's pricing page, and from Make's and n8n's pricing pages. They were last checked on 21 November 2026 and are refreshed every 90 days. Blur Studio has not built this chain or run Blotato. Test with the 7 day trial for the web app and a spare account for the first posts.

How I'd approach this

Week one: set up the sheet and fill 10 rows by hand with draft posts for your last 10 blog posts. Use Blotato's trial to post two of them manually, and note how long each takes. Week two: pay for one month, make the key, and build Automation B first. Test it with two hand-written rows. Week three: build Automation A and add the approval habit. Stop there for a month. If the automation saves you time and has not misfired, add a second platform. The free AI tools and the free AI brainstorm call can help you choose what to automate next.

Questions people ask

What is the easiest first automation for social media?

A new blog post creates a draft row in a spreadsheet, you approve it by changing a status cell, and a second automation posts it. It uses your own content and keeps a person in control.

Do I need to code?

No for Make or n8n with Blotato's template, but you will map fields, paste an API key and read error messages. Allow a few hours for a first working flow.

Can I try Blotato's automation during the free trial?

Not the API part. The trial excludes the API and MCP, and creating an API key ends it and starts the paid plan. Use the trial for the web app. See what the trial includes.

Does Blotato have an approval step?

Not for outside software. Posting through the API publishes or schedules at once. Build the gate in your own chain, for example with a status column. See Blotato and approval workflows.

Does Blotato work with Zapier?

Blotato says it has no official Zapier app. Zapier can call Blotato's API with Webhooks by Zapier. For a first build, Make or n8n have official Blotato modules or nodes.

How do I know a post really went out?

Save the submission ID, wait at least 10 seconds, then ask Blotato for the status. Count a post as done only when the status is published, not scheduled.

How much will this cost a month?

At least Blotato Starter at $29 a month, billed monthly, as of November 2026. The builder can start on Make's free plan or an n8n trial, so your first month may cost only the Blotato plan. Check each pricing page.

More in this topic: Social media: automation with n8n, Make and Zapier (27 guides) →

Sources

Ready for the next step?

A free 15-minute AI brainstorm. We find 3 broad areas where AI could help your business.

Ranjit Bhinge You talk to me, Ranjit. I reply within a few hours.
Book a free AI brainstorm call

Not sure what you need? Tell me what is going on. I will point you the right way, even if it is not me.

Blur Studio · 30 minute call

Book a 30 minute call

You talk to me, Ranjit. If you do not need me, I will tell you.

  • We talk about your business and what is going on.
  • You leave with a clear next step, even if it is not me.
  • I reply to every message within a few hours.
Loading the calendar…