How to set up a keyword DM automation in Blotato, step by step

By Ranjit Bhinge, founder of Blur Studio · Updated · 10 min read

Short answer: Blotato, an AI social media tool and software subscription that schedules social media posts and can also reply to comments and messages, lets you build a keyword direct message (DM) automation in its web app. You open DM automations, click New automation, pick the Instagram account or Facebook Page, set a comment trigger and keywords, write a message of up to 640 characters with up to 3 link buttons, then Publish. One catch decides most setups: the post picker lists only posts published through Blotato, so for older posts you use "On any Post or Reel" plus a keyword.

Ranjit Bhinge

You want a comment on your Instagram or Facebook post to send the person a DM with your link, and you want the exact clicks to set it up in Blotato without a surprise.

I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.

This page is a click by click guide for the keyword DM feature in Blotato. It follows Blotato's own help page for DM automations, and I name the labels exactly as that page does. Instagram is Meta's photo and video app. A Facebook Page is the business profile on Facebook. Blotato says DM automations work on those two only. If a label does not match your screen, trust your screen.

This page may contain affiliate links from which Blur Studio earns commissions.

Before you start: four checks

  1. Account type. Instagram must be a Professional account (Business or Creator). Blotato says messaging on a personal Instagram account is not supported.
  2. Reconnect if the account is old. Blotato says an account connected before messaging, comments or follow gating launched must be reconnected so it receives the new permissions. Do this on the Accounts page.
  3. Instagram setting. In the Instagram app, go to Settings, then Messages and story replies, then Connected tools, and make sure "Allow access to messages" is on. Blotato's docs name this setting. If your app shows slightly different words, search the Instagram help for the same menu.
  4. You own the post. For Instagram comment triggers, the connected account must have published the post. A post where your account is only a collaborator will not fire. Build the automation from the account that published it.

You also need a plan. The 7 day trial lets you build and test automations in the web app (the trial excludes API and MCP access, and creating an API key ends the trial at once). See what the trial includes and blocks. Blotato lists no free plan. As of November 2026 the Starter plan is $29 a month, billed monthly, and it includes DM automations with 1,000 active contacts a month. That limit is explained in active contacts explained.

Decide four things on paper first

Write these down before you open the app.

  • The keyword. One short word people can type without a typo, such as GUIDE. Blotato matches anywhere in the comment and ignores case, accents and styled fonts, so "price" also matches "pricey". Pick a word that does not appear in ordinary comments.
  • The post scope. One post, or every post. This is the choice that trips people up, so the next section covers it.
  • The message. Up to 640 characters, at most 3 link buttons, each label at most 20 characters.
  • The human. Who reads replies and what they do when someone answers with a question. Automation sends the first message. A person handles the rest.

Post scope: why you may not see your post

Blotato says the post picker lists posts published through Blotato only. A post you published in the Instagram or Facebook app, in Meta Business Suite or with another tool never appears. A post made through Blotato can also be missing in three cases:

  • It went out on a different connected account. The picker shows posts for the account the automation runs on.
  • It has not published yet. A scheduled post joins the list once it is live.
  • It is not one of the 20 newest. Type part of the caption into "Search your Posts and Reels".

The workaround for an older or outside post is Blotato's own: choose "On any Post or Reel" and add the keyword your post tells people to comment. The automation then answers that keyword on every post and reel on the account. That is fine for one keyword per account. It is risky if you run several offers, so use different keywords per offer and keep one live automation per keyword.

If you want a single post targeted precisely, publish that post through Blotato. For the workflow of drafting and scheduling it there, see what Blotato can reply to.

The setup, click by click

  1. Open DM automations from the web app (it is available in either mode, per Blotato).
  2. Click New automation.
  3. Pick the connected Instagram account or Facebook Page. Blotato locks the account to the flow after you create it, so choose carefully. To use another account later, you create a new flow or use Duplicate.
  4. Name the flow. Blotato's example is "Auto-DM links from comments". Use something you will recognise in a list, such as "IG GUIDE keyword" (names allow up to 60 characters).
  5. Click Create flow.
  6. In the "When someone..." card, check Comments. You may also check Sends a DM for a second trigger. One automation holds at most one comment trigger and one message trigger.
  7. Pick On a specific Post or Reel or On any Post or Reel. For a specific post, search and select it.
  8. In the "And the comment has" field, type the keyword and press Enter. Add spelling variants as separate keywords if you expect them (for example GUIDE and GUIA). Both triggers share one keyword list. If you leave the field empty, the automation fires on every comment or message, which you almost never want.
  9. Write the message in the Message field. Replace the sample text "Tap below to get your link" and the default View link button that points to blotato.com. Blotato says to replace both before publishing.
  10. To add a link, click Add a button, type a Button label (up to 20 characters) and the Web URL. Repeat for up to 3 buttons.
  11. Review the Reply to the comment card (the public reply). It switches on with 3 default replies that tell the person to check Message Requests. You can edit them, add up to 6, and use {{mention}} to tag the person. At least 3 must be filled in.
  12. Optional steps: Ask for a follow, Ask for an email address, Call a webhook. Leave them off for a first test. The gates are covered in the follow gate and email gate guide.
  13. Click Save and Publish, then Publish if the status badge still says Draft. The badge should read Live.

New automations start as Draft. To stop one later, click Move to Draft. It stops new runs and lets runs already in progress finish. You can also pause a single trigger with the switch beside it, without republishing.

Message and button rules

ItemLimit (Blotato, Nov 2026)
Message1 to 640 characters (emoji count as several)
Link buttonsUp to 3, label up to 20 characters
Triggers per automation2 (one comment, one message)
Public replies3 to 6, picked at random, up to 2,200 characters on Instagram
Flow name60 characters

Two button facts matter in practice. First, buttons show in the Instagram mobile app only. Someone reading on instagram.com in a desktop browser sees text and no button. Second, for Instagram use a button or a plain text link, not both. A message carrying both leaves the link unclickable on desktop. If most of your audience is on phones, keep the button and keep the URL out of the text. If many are on desktop, remove the button and write the URL in the text.

Example message (made up, 184 characters, one button):

Hi, thanks for commenting GUIDE. Here is the free planning checklist for first time buyers. Tap the button to open it. If it does not open, reply HELP and a person will send it to you.

Button label: "Open the checklist" (18 characters). Button URL: your page with a tracking tag, for example https://example.com/checklist?utm_source=instagram&utm_medium=dm&utm_campaign=guide. Blotato documents no click tracking, so the tag is how you see visits in your own analytics.

Optional: send the person to another tool with a webhook

A webhook is an automatic message from one tool to another. In Blotato, "Call a webhook" sends your endpoint (the address of your own system or of an automation tool such as Zapier, Make or n8n) a small package after the DM goes out. Blotato lets you choose GET, POST, PUT, PATCH or DELETE, enter a URL up to 2,048 characters, and add headers. Every method except GET carries this JSON body:

{ "email": "them@example.com", "isFollower": true }

The email is null when Blotato holds none, and isFollower is null when no follow check ran in the last 30 days. Two limits to plan for. Blotato waits 15 seconds and does not retry. It does not follow redirects, so use the final URL. Blotato's own pages describe webhook failures in two ways. The webhook rules and the errors page say a slow or erroring endpoint does not stop the run (it still completes and Blotato logs a warning, shown as a 15 second timeout, code 20305), while a blocked address, a DNS failure or a connection error fails the run with code 20304. The troubleshooting list, though, names a webhook failure after the DM as a cause of failed runs. Check the run status on your own test rather than assuming. Because there is no retry, make your endpoint answer at once. Keep secrets in a header, not the URL, since logs show the URL and body.

Test plan with pass and fail criteria

Your own comments never trigger an automation, so you need a second account. Use a personal account that follows nobody connected to your business, and a second one that follows you, because Meta delivers to different folders for each.

  1. Publish the automation. Sign in to the second account.
  2. Write a new top-level comment with the keyword under the target post. Not a reply to an existing comment.
  3. Soon after, check that the DM arrives. Pass: the message text is right, the button opens the right page on a phone. Fail: nothing arrives.
  4. Check the public reply appears under your comment. Pass: it appears after the DM and tags you if you used {{mention}}.
  5. Repeat from an account that does not follow you. Meta puts the message in Requests for non-followers, so confirm the public reply tells people to check Requests.
  6. Comment a keyword in lower case, then with a typo. Pass: lower case works, the typo does not (that is correct behaviour).
  7. Comment the keyword twice from the same account. Blotato says every matching comment starts a new run, so expect two replies. If you do not want that, say so in your post.
  8. Open the automation and read the runs. Pass: status completed. Fail: status failed, with an error code to look up.

Reading the logs and fixing failures

The list shows Runs 24h, Success, Failed, Last run and State. Blotato says to open Developer Platform, then Logs, and filter to DM when you investigate a failed run. Run states you will meet: running, waiting, completed, expired, superseded and failed. Error codes Blotato documents: 20101 (the monthly active contact limit was reached, run ends failed), 20303 (the automation is invalid: no active trigger, a message outside 1 to 640 characters, a bad button URL or a bad public reply) and 20304 (the webhook was blocked or failed to connect).

SymptomLikely cause (from Blotato's docs)What to do
Nothing sendsOwn comment, reply instead of top-level comment, automation still Draft, or account needs reconnectingTest from another account, comment at top level, confirm Live, reconnect on the Accounts page
Second automation failsTwo automations matched the same commentKeep one live automation per keyword per account
Failed after the DMA public reply or a webhook failedFix the reply text or endpoint, then test again
Failed, no DMComment already got a private reply (here or in another tool), or a window problemCheck the other tools on the account
Error 20101Monthly contact cap reachedWait for the reset or upgrade

If another DM tool controls the conversation on the same account, Blotato says follow ups can be rejected. It names ManyChat as a common case and gives a checklist: in Meta Business Suite (Meta's free dashboard for Facebook and Instagram) set the default routing app to Blotato or none, and turn off "Take control of conversations" for other apps. Do not run two DM tools on one account until you have read that. For the side by side view, see Blotato vs ManyChat.

Blank test log you can copy

DateTest accountFollows us? (Y/N)Keyword typedDM received (Y/N, minutes)Button openedPublic reply seenRun statusNotes

When not to use Blotato for this

  • You need branching flows, such as "if they pick option A, ask this next". Blotato's docs describe triggers, gates, a message and a webhook, with no branching described. A DM-first tool such as ManyChat is built around flows. ManyChat is a chat automation tool for Instagram, Facebook, WhatsApp and other channels.
  • You need WhatsApp, SMS or TikTok DMs. Blotato supports Instagram and Facebook Pages only.
  • You expect hundreds of thousands of contacts. Plans cap active contacts at 1,000, 6,000 or 15,000 a month, and sends fail at the cap.

How this page was checked

Facts come from Blotato's help pages for DM automations, errors and billing, and from Blotato's pricing page. Last checked 21 November 2026, refreshed every 90 days. Blur Studio has not run Blotato itself, so the steps are Blotato's documented steps and the test plan above is for you to run. Use the 7 day trial, or an equivalent, before you rely on it.

How I'd approach this

Day 1: start the trial on Blotato, connect one Instagram Professional account, reconnect if needed, and build the automation with a keyword and no gates. Day 2: run the test plan from two accounts and fill in the log. Day 3: change the public reply wording and test the phone button. Day 4: add UTM tags and check they appear in your analytics. Day 5: go live on one post only, read the runs, and have a person answer any reply the same day. Add a gate or a webhook only in week two. If the test fails twice in a row, stop and ask Blotato support in the in-app chat with your account handle and automation ID. If you want a second pair of eyes on the flow, the free tools at /free and a free AI brainstorm call are open to you.

Questions people ask

Can I target an Instagram post I published in the Instagram app?

Not through the post picker. Blotato says it lists only posts published through Blotato. Use "On any Post or Reel" with a keyword, which answers that keyword on every post and reel on the account. To target one post precisely, publish it through Blotato.

Why did my own test comment not trigger anything?

Blotato skips comments from the same Instagram account or Facebook Page that the automation runs on. Comment from a different account, and make it a new top-level comment, because a reply to another comment does not start a run.

How long can the DM be and how many buttons can I add?

Blotato allows 640 characters, with emoji counting as several, and up to 3 link buttons with labels of up to 20 characters. Buttons show in the Instagram mobile app only, so desktop readers see text without a button.

Does Blotato show how many people clicked my link?

Blotato's docs list run counts (runs in 24 hours, success, failed, last run) and no link click metrics. Add UTM tags to the button URL and read clicks in your own analytics. See what to track.

Can two automations use the same keyword?

Blotato advises keeping one live automation per keyword on each account. If two match the same comment, one reply reaches the person and the other run fails. Two matching the same DM both send.

What happens if my webhook is slow or down?

Blotato waits 15 seconds and does not retry. Blotato's pages say a slow or error response is logged and the run still completes (a timeout shows as code 20305), while a blocked address, a DNS failure or a connection error fails the run with code 20304. Its troubleshooting list also names webhook failures as a cause of failed runs, so check your run status. Build your endpoint to answer fast and process later.

Does the automation work on Facebook Pages the same way?

Mostly. Blotato says DM automations run on Instagram accounts and Facebook Pages. The follow gate is Instagram only, and Facebook's public reply limit is counted in bytes, not characters. Facebook DMs to people who never messaged the Page can land in Message Requests.

More in this topic: Social media: comment-to-DM and inbox automation (20 guides) →

Sources

Ready for the next step?

A free 15-minute AI brainstorm. We find 3 broad areas where AI could help your business.

Ranjit Bhinge You talk to me, Ranjit. I reply within a few hours.
Book a free AI brainstorm call

Not sure what you need? Tell me what is going on. I will point you the right way, even if it is not me.

Blur Studio · 30 minute call

Book a 30 minute call

You talk to me, Ranjit. If you do not need me, I will tell you.

  • We talk about your business and what is going on.
  • You leave with a clear next step, even if it is not me.
  • I reply to every message within a few hours.
Loading the calendar…