Which numbers should I track to know my property management company is healthy?
Short answer: A KPI (key performance indicator) is a number you check on a schedule to see whether part of your business is working. For a property management company, start with eight: physical occupancy, economic occupancy, rent collection rate, days to lease, tenant turnover, work order time, revenue per door and owner churn. Track them monthly in one place, compare each to your own last twelve months first, and use outside benchmarks only as a rough guide because they differ by market.
You run a property management company on instinct and a pile of reports, and you want a short list of numbers that tell you early when something is going wrong.
I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.
Most property managers have too many reports and too few answers. Your software can produce hundreds of numbers. You need about eight. This page gives you each one with a formula, a made-up example, where to find it in your software, and the benchmarks that are actually published.
What a KPI is, and what it is not
A KPI is a single number with a clear formula, checked on a regular schedule, that makes you act when it moves. A report is a list of facts. A KPI is a fact with a job. "Late rent is 8 percent of billed rent" is a KPI if you decide in advance what you do at 10 percent. To see what a good dashboard shows, read the property management dashboard guide.
Two terms first. NOI (net operating income) is the money a property keeps after operating costs, before loan payments. A work order is a maintenance request logged in your system, from the tenant's call to the repair being closed.
The eight KPIs
| KPI | Formula | Check |
|---|---|---|
| Physical occupancy | Occupied units divided by total rentable units, times 100 | Weekly |
| Economic occupancy | Rent collected divided by gross potential rent (rent if every unit paid in full) | Monthly |
| Rent collection rate | Rent collected on time divided by rent billed, times 100 | Monthly, plus day 5 and day 10 |
| Average days to lease | Total days from vacant to signed lease, divided by leases signed | Monthly |
| Tenant turnover | Move-outs in 12 months divided by total units, times 100 | Quarterly |
| Work order time | Total days from opened to closed, divided by work orders closed | Monthly |
| Revenue per door | Your management revenue divided by doors managed | Monthly |
| Owner churn | Doors lost in 12 months divided by doors at start of the year, times 100 | Quarterly |
The occupancy and turnover formulas follow what Buildium, a property management software company, publishes in its guides. Buildium also lists average days to lease (time from vacancy to a signed lease) and NOI as KPIs but does not give formulas for them. The days to lease, work order, revenue per door and owner churn formulas are my own plain versions, built to work for a small company with a spreadsheet. For how AI helps with reports, see AI property management reporting.
Physical versus economic occupancy
These two look the same and are not. Physical occupancy counts filled units. Economic occupancy counts money. Buildium's example: a property can be 96 percent physically occupied and only 88 percent economically occupied because of concessions (free rent), loss-to-lease (leases signed below market) or unpaid balances. If you track only the first, you miss the gap that costs your owners money.
Worked example (made-up figures)
Take an imaginary company with 120 doors. All numbers below are invented.
- Occupancy: 114 occupied of 120, so 95 percent.
- Collection rate: $168,000 billed, $159,600 collected on time, so 95 percent. Five points sounds small, but it is $8,400 sitting outside the owners' accounts.
- Days to lease: 6 leases signed after 18, 25, 31, 12, 40 and 22 days vacant. Total 148, divided by 6 gives 24.7 days.
- Turnover: 30 move-outs in the year divided by 120 gives 25 percent.
- Work order time: 90 closed work orders took 405 days in total, so 4.5 days each.
- Revenue per door: $18,600 in monthly management revenue divided by 120 gives $155 per door.
- Owner churn: 9 doors lost out of 120 at the start of the year gives 7.5 percent.
Each line suggests a question. Why did one unit take 40 days? Who is in the 5 percent late? Which three work orders dragged the average up?
Benchmarks that are real, and ones to treat carefully
- Rental vacancy: the U.S. Census Bureau reported a national rental vacancy rate of 7.6 percent for the third quarter of 2026, up from 7.1 percent a year earlier. That is a national figure for all rental housing. Your market and building type will differ.
- Owner churn: Buildium's article, citing NARPM (the National Association of Residential Property Managers), puts average annual client churn at 19.5 percent and the best companies at 9.6 percent. That is a trade group figure quoted second hand, so use it as a rough reference only.
- Days to lease: Buildium says units in hot markets often lease in under two weeks. It also warns against cutting rent just to speed leasing.
Public benchmarks for work order time and revenue per door are thin, so treat any you see with caution. Your own twelve-month history is a better target than any article, including this one.
KPIs for maintenance
Maintenance is where tenants decide whether to renew. Three numbers cover it: time from request to closed work order, the share fixed on the first visit (fixes done in one trip divided by total work orders), and the count of work orders open more than 30 days. The third is the one that finds trouble. An average hides one repair that has been open for 70 days.
Where to get each number
Occupancy, rent roll, delinquency and work order lists come from standard reports in property management software such as AppFolio, Buildium and DoorLoop (cloud tools that handle rent, leases, maintenance and accounting in one place). Days to lease, turnover and churn usually need a small calculation outside the software. Revenue per door comes from your own accounting. As of November 2026, AppFolio lists Advanced Data Analysis on its Plus plan (from $3.20 per unit per month, minimum spend and units apply), and Buildium describes an Analytics Hub with industry benchmarks. Check each vendor's pricing page before you rely on a plan for this.
If you pull numbers from several places, a KPI dashboard keeps them together, and a spreadsheet turned into a dashboard is the cheapest first version. For the owner-facing side, see the monthly owner report template.
How often to look
Not every number needs the same rhythm. Occupancy and late rent move fast, so look at them weekly, and on day 5 and day 10 of the month for rent. Days to lease and work order time are monthly. Turnover and owner churn are slow, so a quarterly look is enough. The mistake I see most is checking everything daily, which turns the numbers into noise. A good rule: if you would not change what you do this week, do not check it this week.
Also write down who owns each number. Leasing owns days to lease, your maintenance coordinator owns work order time, and you own churn. A KPI with no owner is a chart.
How to set up a monthly KPI sheet
- Open a spreadsheet with one row per month and one column per KPI.
- Fill in the last twelve months from your reports. This gives you your own baseline.
- Write a trigger next to each: "collection under 93 percent, call the top five late accounts."
- Update it on the same day each month, right after you close the books.
- Review it for 20 minutes with whoever runs leasing and maintenance.
Common mistakes
- Tracking an average with no list behind it.
- Comparing months in different seasons. Compare to the same month last year too.
- Counting a unit as occupied when the lease has ended and the tenant is holding over.
- Choosing a number because the software shows it, not because you would act on it.
How I'd approach this
I would pick the three that scare you most and start there: collection rate, work orders open past 30 days, and owner churn. Those three catch cash trouble, tenant anger and lost clients, in that order of speed. Add the others once those three are stable in a sheet.
Do not buy a tool for this yet. Do it by hand for three months so you learn which numbers you actually act on. Only then decide whether your software reports are enough or whether you need a dashboard. For a broader look at software choices, see property management software.
Questions people ask
What is a KPI in property management?
A KPI is a number you check on a schedule to see if part of your business is working, with a clear formula and an action when it moves. Examples are occupancy, rent collection rate, days to lease and work order time.
What are the most important property management KPIs?
Occupancy, rent collection rate, work order time, tenant turnover and owner churn give the fastest picture. Add economic occupancy and revenue per door to see whether the company makes money, not just whether it is busy.
What are good property management KPI benchmarks?
Few public benchmarks exist. The Census Bureau reported a 7.6 percent national rental vacancy rate for Q3 2026, and Buildium cites NARPM average owner churn of 19.5 percent with 9.6 percent for top companies. Your own twelve-month history is the more useful target.
What is the best KPI for maintenance?
Average time from request to closed work order, paired with the count of work orders open more than 30 days. The first shows speed. The second finds the neglected jobs that an average hides.
Where do I get these numbers from AppFolio or Buildium?
Occupancy, rent roll, delinquency and work order reports are standard. Days to lease, turnover and churn often need a small calculation in a spreadsheet. A KPI dashboard can pull them together automatically.
More in this topic: US property management: reports and owner statements (9 guides) →