Which property management tools have an open API you can build on?
Short answer: Rentvine, a property management system sold per unit, publishes its API docs openly and lists the API as part of the platform. Rentec Direct, a lower-cost system for landlords and small managers, also publishes full docs and includes its API on the Pro and PM plans. Buildium, which sells property management software in three plans, locks its Open API behind the Premium plan. AppFolio, a large property management platform, lists a read-only API on Plus and a read and write API on Max, all as of November 2026.
You want to know which property management systems let you build your own dashboards and tools later, before you pick one and get locked in.
I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.
What does "open API" actually mean?
An API is a set of doors that one piece of software opens so another program can ask it for data or send it changes. If your property management system (PMS, the software that runs your rent, leases, maintenance and books) has an API, a developer can pull your rent roll into a dashboard without anyone exporting a file by hand. For a newer option, see Rentvine versus AppFolio.
"Open" gets used loosely. In practice I see three levels, and the difference matters more than the word on the sales page:
- Public docs, anyone can read them before buying. You can show the docs to a developer today and ask, "can you build this?"
- Gated by plan. The API exists, but only on a higher tier, or as a paid add-on.
- Gated by approval. The vendor decides who gets access.
The tools below sit at different levels. This is a plain look at each, with prices dated as of November 2026.
Side by side: who includes an API
| Tool | What it is | API access | Docs public? |
|---|---|---|---|
| Rentvine | Property management system for management companies, priced per active unit | Listed as part of the platform; confirm in your quote | Yes, at docs.rentvine.com |
| Rentec Direct | Property management software for landlords and small managers | Included with Pro and PM, not Starter | Yes, API v3 docs |
| Buildium | Property management software in Essential, Growth and Premium plans | Premium only | Yes, developer site |
| AppFolio | Property management platform for mid-size and large portfolios | Read only on Plus, read and write on Max | Ask AppFolio |
| DoorLoop | Property management software with an AI assistant built in | Listed as full API access on DoorLoop One | Yes, reference site |
| Propertyware | Property management system sold per unit with a monthly minimum | Paid add-on: +$1 per unit per month | Ask Propertyware |
"Read only" means a program can look at your data but cannot change it. "Read and write" means it can also create or update records, such as posting a charge or adding a vendor. For how the pieces connect, see property management integrations.
Rentvine API: what you get
Rentvine's pricing page says it is priced per active unit, "as low as $1.50 per unit," and you request a quote. It lists a "fully open API" among its platform features, and its Open API page says the API covers properties, leases, tenants and maintenance requests.
The public docs go further than that sentence. They list endpoints (the individual doors) for exporting leases, properties, units and applications. They cover accounting too: bills, deposits, ledgers, transactions and diagnostics that flag things like negative bank accounts. Contacts such as owners, tenants and vendors have create, update and delete calls. Portfolios can be created, updated and activated or deactivated, and owner statements can be searched and downloaded. You can also download the whole thing as an OpenAPI specification, a file a developer's tools can read directly.
Setting it up is short:
- In your Rentvine dashboard, go to Settings, then Users, Roles and API, then API.
- Create the role you want first. A role decides what the key can touch.
- Select New API Key, name it, and pick the role.
- Copy the access key and the secret. Rentvine shows the secret once, so store it in a password manager.
Requests use HTTP Basic authentication, which means the access key acts as the username and the secret as the password. Rentvine also advertises an MCP connection, a standard way for AI tools to read your live Rentvine data. Its Open API page says you own your data. Ask in writing what request limits apply to your plan before a developer builds anything heavy.
Propertyware API: an add-on, not a given
Propertyware's pricing page says plans start at $1 per unit per month, with monthly minimums of $250 (Basic), $350 (Plus) and $450 (Premium) and an implementation fee of two times the monthly subscription. The footnote is the part that matters here: "For Enterprise/API: Add $1 per unit/per month to any package."
So on Propertyware the API is something you pay for per unit. Ask the vendor for the current API docs and terms before you plan around it.
Rentec Direct API: open docs, small-firm price
Rentec Direct lists a flat $25 a month for its Starter plan (for 10 or fewer properties). Its pricing page says Pro adds access to the API, Zapier integrations and bank sync, and PM adds trust accounting, owner accounting and an owner portal. Zapier is a no-code tool that connects apps without a developer. Pro and PM prices depend on how many units you enter on the pricing page, so check it for your size.
The API v3 docs are public and written for developers. A few facts a buyer should know:
- You make keys at Settings, then Utilities, then API Keys, and you can give each key narrow permissions such as "read:properties" or "write:tenants".
- The limit is 60 requests per minute per user. Go over and you get an error until the minute resets.
- It covers properties, tenants, leads, owners, vendors, leases, work orders, messaging, files and accounting transactions.
- Some parts are read only: owners and rental applications. Applicant Social Security numbers, birth dates and ID numbers are not available through the API at all.
That last point is a good example of why you should read the docs before you promise anyone a feature. The data exists in the system, but the door is closed on purpose.
AppFolio, Buildium and DoorLoop
AppFolio. AppFolio's pricing page lists Core from $1.49 per unit per month (50 unit minimum), Plus from $3.20 with a read-only API, and Max from $5.00 with a read and write API. Minimum spend applies. Core does not list an API, so a firm that wants one has to move up two price tiers. If your question is about getting reports out, my guide to AppFolio reports covers the options.
Buildium. Buildium's pricing page shows Essential from $65 a month, Growth from $202 and Premium from $420, with the price rising with unit count. Premium is the plan that lists Open API. Its developer docs say you need a Premium subscription, then you turn the API on and create keys. They also set a limit of 10 requests per second, offer a sandbox with mock data for testing, and describe webhooks, which are messages Buildium sends to your system the moment something changes.
DoorLoop. DoorLoop's pricing page lists DoorLoop One from $2.50 per unit per month on yearly billing, as low as $1.50 per unit above 100 units, and says it includes "full API access." Minimum spend and units apply. The reference site lists read and write calls for leases, payments, charges, tasks, expenses and vendor bills, plus report calls for rent roll, profit and loss, cash flow and balance sheet. Ask your rep to confirm in writing that API access is active on your account.
Yardi Breeze, Yardi's cloud property management software, is not in the table because Yardi's Breeze pages describe no public API. Ask Yardi directly, and see Yardi Breeze API.
What can you build with an API?
- An owner dashboard that shows each owner their occupancy and income without a monthly email.
- A vacancy alert that tells your leasing person when a notice comes in.
- A rent roll in a sheet that refreshes itself, instead of a file someone exports every Monday.
- An AI assistant that answers "which leases end in 60 days" from live data. My guide to what an AI agent is explains the idea.
Worked example with made-up numbers
Say you manage 200 units and want a live dashboard. These figures are made up to show the shape of the choice, not a quote.
- On Propertyware, if your per-unit rate is $1 (its pricing page says plans start at $1 per unit per month, so confirm your rate), 200 units is $200 a month, which is under the $250 minimum, so you pay $250. Add $1 per unit for API access and that is another $200, so about $450 a month before fees.
- On Rentec Direct the API sits in Pro and PM, so there is no separate API line. The question becomes whether the plan has the features you need.
- On AppFolio you would price Plus at $3.20 per unit, which is $640 a month at 200 units, before any minimum.
The cheapest API on paper is not always the cheapest build. A developer's time costs more than a $200 a month line item, so pick the system your team will actually live in, then check what its API allows.
Watch-outs before you commit
- Request limits. Rentec's 60 per minute and Buildium's 10 per second are enough for a dashboard, not for syncing 50,000 records in one go.
- Keys are passwords. Give each tool its own key with the smallest role that works, and delete keys you no longer use.
- Plans change. Vendors rename and reshuffle plans, so an API clause you read a year ago may be gone. Check the pricing page again before you sign.
- Read before write. A tool that writes charges into your ledger can create real accounting problems. Start with read only.
If you later want something custom, the usual question is whether to build or buy. My guides to build versus buy and internal tools cover that.
How I'd approach this
I would not pick a PMS on its API alone. I would pick on whether it handles your rent, trust accounting and maintenance well, then use the API as a tiebreaker.
If you already run one of these, ask three questions in writing: does my plan include API access, is it read only or read and write, and what are the request limits. Get the answers before you hire anyone. Then start with one small, read-only tool, such as an owner dashboard, and see if your team uses it. If it saves time, add the next one.
Questions people ask
Does Rentvine have an API?
Yes. Rentvine's Open API page says the API covers properties, leases, tenants and maintenance requests, and its docs at docs.rentvine.com list far more, including accounting, owners, vendors and statements. Keys are created in the dashboard under Settings, then Users, Roles and API. Ask for your plan's request limits in writing.
Does Propertyware have an API?
Propertyware's pricing page lists "Enterprise/API" as an add-on of $1 per unit per month on top of any package, as of November 2026. Ask Propertyware for the current docs and terms before you plan around it.
Does Rentec Direct have API documentation?
Yes. Rentec Direct publishes API v3 docs, with keys made under Settings, then Utilities, then API Keys, and a limit of 60 requests per minute per user. Its pricing page lists API access on Pro and PM, not Starter.
Which property management software has the best API?
It depends on what you want to build. Rentvine, Rentec Direct, Buildium and DoorLoop publish API docs you can read before you buy. Buildium needs Premium, AppFolio needs Plus or Max, and Propertyware charges extra. Read the docs for the exact data you need before you choose.
Can I connect a property management system to Zapier instead of using the API?
Sometimes. Rentec Direct lists Zapier integrations on Pro and PM, and DoorLoop's pricing page lists API access and Zapier among its features. Zapier is simpler for small jobs. See my comparison of Zapier and Make. For anything bigger, a direct API build is steadier.
Do I need a developer to use a property management API?
Yes, or a service that does the work for you. Rentec Direct's own docs say the API is for web developers who work with REST APIs and JSON. A no-code tool can cover simple jobs without one.
More in this topic: US property management: APIs and integrations (11 guides) →