Spec sheet template: what to put on it, how to format it and how to keep it current
Short answer: A spec sheet (short for specification sheet) is a one or two page document that lists the facts about one product: size, materials, performance, standards it meets and its part numbers. Use one table of fields per product, with exact values and a revision date. It is the same kind of document as a data sheet or cut sheet, and it is one part of a submittal, which is the full package a contractor sends for approval. Keep the numbers in one master list so every sheet is built from the same current data.
A customer asked for a spec sheet, and you want a clean template to fill in and a way to stop sending out old numbers.
I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.
What is a spec sheet?
A spec sheet lists the facts a buyer needs to decide if a product fits the job. Wikipedia's entry on the datasheet says a datasheet, data sheet or spec sheet summarizes the performance and other traits of a product in enough detail that a buyer can understand what it is, and that it is typically created by the manufacturer.
The key word is facts. A spec sheet says the pump moves 40 gallons a minute. It does not say the pump is "powerful". Buyers, engineers and purchasing staff use it to check a product against a drawing or a purchase request, so every value has to be exact and every unit has to be shown.
Spec sheet vs data sheet vs cut sheet: are they different?
In most small companies, the three names mean the same document. Some firms draw a line, and it helps to know where.
| Name | What people usually mean | Who reads it |
|---|---|---|
| Spec sheet | Plain facts: sizes, materials, ratings, standards | Engineers, buyers, your own reps |
| Data sheet | The same facts, often with a short feature list and a photo | Buyers comparing products |
| Cut sheet | The word the building trades use for a manufacturer's product page | Architects, contractors |
| Brochure | Marketing copy about benefits, light on numbers | New prospects |
My advice: build one master document and call it whatever your customers call it. Do not keep a "spec sheet" and a "data sheet" for the same product, because two files for one product will drift apart.
What is the difference between a spec sheet and a submittal?
A submittal is a package of documents that a contractor sends to the architect or engineer for approval before installing something. Wikipedia's page on construction submittals lists product data, shop drawings and samples as the main kinds. Procore, a construction software company, describes the product data part as manufacturer documents called data sheets or cut sheets, with sizes, performance data and installation notes.
So a spec sheet is a part. The submittal is the whole bundle. If a customer asks you for "the submittal", they usually want the spec sheet plus any test reports, certificates, warranty pages and installation instructions. Keep those files in one folder per product so you can send the bundle in a minute.
What should a spec sheet include?
Here are the fields I would put on every sheet. Drop any that do not apply to your products.
- Product name and part number: Use your own SKU (stock keeping unit, the code you use to track an item) and, if different, the manufacturer's number.
- Short description: One plain sentence on what it is and what it is for.
- Dimensions and weight: Length, width, height, weight, with units. Add packed size if you ship it.
- Materials and finish: For example "304 stainless steel, brushed".
- Performance data: Capacity, pressure, voltage, temperature range, whatever the buyer checks.
- Standards and certifications: The standard number and the year or revision, so nobody has to guess.
- Packaging and ordering: Units per case, minimum order quantity (MOQ, the smallest order you will take), lead time.
- Image or drawing: One clear picture or line drawing with sizes marked.
- Revision date and version: This is the field people skip, and it is the one that saves you in a dispute.
- Contact: A name or email for questions.
A spec sheet template you can copy
Make a two-column table in Word or a sheet in Excel with these rows. Put the field on the left and the value on the right. Put your logo and the product name at the top.
| Field | Value |
|---|---|
| Product name | (name as customers say it) |
| Part number / SKU | (your code) |
| Description | (one sentence) |
| Dimensions (L x W x H) | (value and unit) |
| Weight | (value and unit) |
| Material and finish | (value) |
| Performance rating | (value and unit) |
| Standards met | (standard number and year) |
| Units per case and MOQ | (values) |
| Lead time | (days or weeks) |
| Revision date | (date and version) |
| Contact | (name, email) |
Save it as a Word template (a file that opens as a fresh copy each time). Export each finished sheet to PDF before you send it, so nobody edits it by accident.
A filled-in example
These figures are made up for illustration. They show the level of detail, not a real product.
| Field | Value |
|---|---|
| Product name | Contractor utility hose, 3/4 inch |
| Part number / SKU | HOSE-075-50 |
| Description | Reinforced rubber hose for water, 50 foot length, brass fittings |
| Dimensions | Inner diameter 0.75 in, length 50 ft |
| Weight | 14.2 lb |
| Material and finish | EPDM rubber, polyester braid, brass couplings |
| Performance rating | Working pressure 250 psi, temperature range 0 to 160 F |
| Standards met | (list the exact standard and year here) |
| Units per case and MOQ | 4 per case, MOQ 1 case |
| Lead time | 3 to 5 days from stock |
| Revision date | 2026-11-12, version 3 |
| Contact | sales@yourcompany.example |
Notice that every number has a unit, and the standards row names a specific standard. "Meets industry standards" is not a spec.
A second filled-in example, in metric units
Again, these figures are made up. This one shows a small part sold in metric sizes, to show that the same template works for a very different product.
| Field | Value |
|---|---|
| Product name | Hex head bolt, M10 x 40, stainless |
| Part number / SKU | BOLT-M10-40-SS |
| Description | Fully threaded hex head bolt for general fixing work |
| Dimensions | Thread diameter 10 mm, length 40 mm, head across flats 17 mm |
| Weight | 0.045 kg each, 4.5 kg per box of 100 |
| Material and finish | Austenitic stainless steel, plain finish |
| Performance rating | (tensile strength class, with the standard it comes from) |
| Standards met | (list the exact standard and year here) |
| Units per case and MOQ | 100 per box, MOQ 1 box |
| Lead time | In stock, ships the same day if ordered before noon |
| Revision date | 2026-11-12, version 1 |
| Contact | sales@yourcompany.example |
Two rows are left as prompts on purpose. Take the strength class and the standard from your supplier's own paperwork, and do not fill them in from memory.
How should you write units and numbers?
Units are where spec sheets most often go vague. The US National Institute of Standards and Technology (NIST) publishes rules for writing units in the International System of Units (SI, the metric system), and they are easy to follow:
- Put a space between the number and the unit. NIST's own example is 75 cm.
- Do not add an s to a unit symbol. Write 75 cm, not 75 cms.
- Use the proper symbol, not a casual abbreviation. NIST says to avoid forms such as sec, hrs, amps and cc, and to write s, h, A and cm3 instead.
- Get the capitals right. The unit symbol is lowercase unless the unit is named after a person, so it is V for volt and Pa for pascal, and L for liter. Prefixes follow their own pattern: mL is a milliliter, and MV is a megavolt.
- Do not stack prefixes. Write nm for a nanometer, not a prefix on a prefix.
If you sell in the US you will often show inches and pounds as well. Show both systems in separate rows rather than squeezing them into one cell, and decide which one is the master value so the other is only a converted copy.
Is a spec sheet the same as a safety data sheet?
No. A safety data sheet (SDS) is a separate document for chemical products. Wikipedia describes it as listing occupational safety and health information, in a 16 section format that is agreed internationally, with section 1 for identification and an emergency phone number and the final section carrying the date of the latest revision. The US Occupational Safety and Health Administration (OSHA) says chemical manufacturers and importers prepare SDSs and pass them to their customers, and that employers who have hazardous chemicals on site must keep SDSs available for the workers exposed to them.
If you sell paint, solvents, cleaners, adhesives or similar products, keep the SDS in the same product folder as the spec sheet, and give both the same file-name pattern. Do not copy hazard text into your own spec sheet. Link to the manufacturer's SDS so there is only one version of that wording.
Common mistakes
- Missing units. "Length 50" could be feet, meters or inches.
- Copying the supplier's sheet. You may pass on a number that does not match what you actually stock, such as a different fitting.
- No revision date. When a spec changes, you need to know which version a customer holds.
- Marketing words in the numbers. Keep claims out of the table.
- One sheet per size, edited by hand. Fifty sizes means fifty chances to mistype.
How do you keep spec sheets accurate across hundreds of products?
Stop treating the sheet as the source. Treat it as a printout. The source is one master list with one row per product and one column per field. It can be an Excel file at first. When a number changes, you change it once, and every sheet is rebuilt from that row.
- List every product and every field in one spreadsheet.
- Add a revision date column and a "checked by" column.
- Build the Word template and use mail merge (a Word feature that fills a template from a spreadsheet row) to make one PDF per product.
- When a supplier changes a spec, update the row first, then regenerate the PDF.
- Name files the same way every time, for example the part number plus the version.
This works well up to a few hundred products. After that, people start editing different copies of the spreadsheet, and the process cracks.
How do you make specs searchable for staff and customers?
A folder of PDFs is hard to search. A rep who wants "all stainless fittings rated above 200 psi" has to open files one by one. The fix is to keep the specs as data, in a table where each field can be filtered, and generate the PDF from it when someone needs one.
That is a small web app on top of your master list: a search box, filters by size, material and rating, and a button that makes the PDF. I wrote about turning a spreadsheet into that kind of tool in my guide to turning an Excel sheet into a web app. If you sell online, the same data can feed the product pages, and my page on building a product explainer from a spec sheet and photos shows one use of it. You can also show those specs to trade customers inside a login area, which I cover in my B2B customer portal buyer guide.
How I'd approach this
Start with your ten best sellers. Build the template, fill in the ten sheets by hand, and send them to your three most active customers. Ask what field they wished was there. That feedback is worth more than any generic template.
Then move the data into one master spreadsheet and stop editing PDFs directly. If you get past a few hundred products, or if customers keep asking to filter and compare, that is the point where a simple searchable tool on top of your list pays for itself. Until then, a clean Word template and a disciplined spreadsheet are enough.
Questions people ask
What is a spec sheet?
A spec sheet is a short factual document that lists a product's dimensions, materials, performance data, standards and part numbers. Buyers and engineers use it to check that a product fits the job.
What is the right spec sheet format?
Use a one-page table of fields: product name, part number, dimensions, materials, ratings, standards, ordering details, a picture, a revision date and a contact. Save the final version as a PDF.
What is the difference between a spec sheet and a data sheet?
Many companies use the two names for the same document. When they differ, a spec sheet is plain facts, and a data sheet adds a short feature list and a photo for buyers who are comparing products.
What is the difference between a spec sheet and a submittal?
A submittal is the full package a contractor sends for approval, and it can include product data, shop drawings and samples. A spec sheet, also called a cut sheet or product data, is one part of that package.
Is there a spec sheet template for Word?
You can build one in a few minutes. Make a two-column table with the fields on this page, save it as a template, and export each finished sheet to PDF. An Excel master list can fill the sheets by mail merge. If you want to go further, see turning an Excel sheet into a web app.
More in this topic: B2B: product catalogs and PIM (8 guides) →