Wire and cable distributor software: cut lengths, reels and spec-heavy quotes

By Ranjit Bhinge, founder of Blur Studio · Updated · 6 min read

Short answer: A wire and cable distributor needs software that treats each reel as its own record with a length, takes a cut off that length when a piece is sold, reprices when copper moves, and quotes against detailed specs. General ERPs (one system for orders, stock and accounting) such as Epicor Prophet 21, Epicor Eclipse, Infor CloudSuite Distribution and Acumatica are built for wholesale distribution, but reel and cut-length handling varies, so test each one on your own reels before you buy.

Ranjit Bhinge

You sell wire and cable by the foot off reels, your price moves with copper, and you want to know which software handles cut lengths and spec-heavy quotes without workarounds.

I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.

Why wire and cable is different from other distribution

Most distributors sell units: a box of 100 connectors is one unit. Wire and cable is sold by length, pulled off a reel. That one fact breaks the assumptions in basic stock software.

  • Cut lengths: a customer wants 340 feet off a 1,000-foot reel. The reel now holds 660 feet. The stock record must reduce by the cut, not by one.
  • Reels and remnants: a part-used reel is a different thing to sell than a full one. Short ends need their own handling and often their own price.
  • Units of measure: you buy by the reel, stock by the foot and sometimes price per hundred feet or per thousand feet. A mistake in conversion is an expensive typo.
  • Copper-linked pricing: wire prices move with the copper market. A quote that was right on Monday may be wrong by Friday.
  • Heavy specs: gauge, conductor count, insulation, voltage rating, jacket type and approvals all matter. Two cables that look alike can be wrong for the job.
  • Value-added work: some distributors cut, label, tag or assemble to order.

What your software should do

  1. One record per reel, with a lot or reel number, original length, remaining length and location.
  2. Cut-and-reduce: selling a length reduces the remaining length on a chosen reel, and the invoice shows the length sold.
  3. Multiple units of measure with clear, tested conversions.
  4. A price formula that combines a base price with a copper factor and can reprice open quotes on a set date.
  5. Spec fields you can search, so staff can find a substitute by gauge, rating and jacket.
  6. Customer-specific prices and contract rules. See customer-specific pricing.
  7. Lead times by supplier and mill for items that are not on your shelves.

Which systems are in the running

Most distributors in this trade run a general distribution ERP and make it fit. These four are common choices, and each is described below as the vendor describes itself, as of November 2026. Epicor and Infor show no prices on their product pages, and Acumatica's pricing page gives no dollar figures either (it prices by applications used, resource level and deployment, not per user seat), so ask each for a written quote.

Epicor Prophet 21

Epicor Prophet 21 is an ERP for wholesale distributors. Epicor lists electrical among its industries, with inventory management, a forecast engine, a warehouse management system (WMS, the part that controls receiving, put-away, picking and counting), order management and purchasing. Ask any Prophet 21 partner to show you a cut sale from a part-used reel before you sign. For more detail, see wholesale distribution software.

Epicor Eclipse

Epicor Eclipse is built for electrical, plumbing, HVAC and pipe-valve-fitting distributors. It lists front counter sales, contract pricing, job management and inventory forecasting. Contract pricing and job bids matter in wire, because large jobs are quoted in bulk. Again, check reel handling with your own examples.

Infor CloudSuite Distribution

Infor CloudSuite Distribution is Infor's cloud ERP for wholesale distributors, and Infor features an electrical distributor, State Electric Supply, in its customer stories about AI inside the suite. For electrical distributors it lists complex pricing models, supplier rebate management, kitting and services, and AI-powered configure, price, quote software. Kitting and services matter if you cut, label or assemble to order. Ask Infor or a partner how it models length-based stock.

Acumatica

Acumatica is a cloud ERP with a distribution edition. Its page lists kits, replenishment, demand forecasting, pricing rules and available-to-promise (a live answer to whether you can ship by a date). It also lists lot and serial tracking and picking based on unit of measure. Ask how it handles a stock item sold by the foot from a reel. A closer look is in fastener distributor software.

Smaller shops

If you are small, a stock tool such as Fishbowl, an inventory system with plans from $229 a month billed yearly as of November 2026, may be a stepping stone. It tracks SKUs, and its Scale plan ($729 a month billed yearly) and Advanced Manufacturing plan (from $675 a month) list lot traceability. Its pricing page does not list unit-of-measure conversions on any plan, so test it with a real reel before you rely on it for lengths. My inventory management system guide covers this tier. Whatever you pick, a spreadsheet of remnants beside it is common.

How unit conversion works, with Odoo as the example

Buying by the reel and selling by the foot is the first thing to test, so it helps to know what a normal conversion feature does. Odoo (an open-source suite of business apps) documents it plainly. Units belong to a category, such as length, and conversion works only between units in the same category. Each category has a reference unit, and every other unit is defined as bigger or smaller than it by a ratio. Each product has a unit it is sold and stocked in and a separate purchase unit. A purchase order uses the purchase unit, and the receipt converts to the stock unit. Odoo's own example is two dozens ordered arriving as 24 units.

For wire, that pattern means you would define a 1,000-foot reel as a unit 1,000 times the foot, buy in reels and stock and sell in feet. That handles the unit change. It does not by itself tell you how much is left on one particular part-used reel. That is a separate question, and it is the one to put to any vendor, Odoo partners included.

Worked example, with made-up numbers: your supplier sells a 1,000-foot reel for $480, so your cost is $0.48 a foot. You price per 100 feet at $80.00, which is $0.80 a foot. A customer buys 340 feet. That is 3.4 hundreds, so $272.00, against a cost of $163.20, a margin of $108.80 or 40 percent. Now suppose the sale is keyed as 340 units of a per-100-foot price: the invoice reads $27,200. A per-hundred price and a per-foot quantity is the typo to design out.

A simple test for any vendor

Bring five real examples to every demo and ask the vendor to run them live:

  1. Sell 340 feet from a 1,000-foot reel, then 500 feet, then show what is left.
  2. Sell a remnant of 85 feet at a lower price.
  3. Quote 5,000 feet of 12 AWG building wire, then change the copper factor and reprice the open quote.
  4. Receive a reel whose supplier ships in a different unit than you sell.
  5. Find a substitute cable by gauge, rating and jacket.

Worked example, with made-up numbers: a base price of $0.62 per foot plus a copper factor of $0.18 per foot gives $0.80 per foot. A 5,000-foot quote is $4,000. If copper rises and the factor becomes $0.24, the same quote is $4,300. A system that cannot reprice open quotes on a set date forces someone to do that by hand, quote by quote. Which copper benchmark you use depends on your suppliers, so confirm it with them.

The gaps a custom layer fills

The ERP is the record of stock and money. Around it sit the daily jobs that are slow in this trade.

  • Spec-heavy quotes: a contractor sends a list of cable types and lengths as a PDF. A quote tool can match each line to a SKU and flag ambiguous ones for a person to check. My quote generator guide covers the basics.
  • Reel and cut lengths: if the ERP loses remaining length, a small layer can keep a reel ledger that stays right and syncs to the ERP.
  • Copper repricing: a layer can recalculate open quotes from your formula and email the sales rep which ones changed.
  • Emailed POs: they can be read and checked before they reach the order screen. See AI order entry for distributors.

The principle is the same as in my guide to custom ERP and add-ons: keep the core, build the missing piece.

How I'd approach this

Write down your five hardest real orders first: a cut off a part reel, a remnant, a copper reprice, a substitute and a spec-heavy bid. Judge every vendor on those, not on the brochure. If an ERP handles four of the five and the fifth is a gap, that is a small layer to build, not a reason to switch.

If you do not have an ERP yet, I would still protect the reel ledger first. It is the one thing that is expensive to rebuild once the data is wrong.

Questions people ask

What is the best software for a wire and cable distributor?

There is no single best. Distribution ERPs such as Epicor Prophet 21, Epicor Eclipse, Infor CloudSuite Distribution and Acumatica are common. Test any of them on your own cuts, reels and copper-linked prices before you buy.

How do ERPs handle cut lengths and reels?

Good ones keep each reel as its own record with a length and reduce that length when a cut is sold. Basic systems treat a reel as one unit and lose the remaining length. Ask every vendor to run a live cut from a part-used reel.

How do you price wire when copper changes?

A common approach is a base price plus a copper factor tied to a published benchmark, then reprice open quotes and orders on a set date. Ask any vendor how it handles that repricing, and confirm the benchmark with your suppliers.

Can QuickBooks (accounting software from Intuit) run a wire and cable distributor?

It can run the accounting. For reel and cut-length tracking, check with Intuit whether it fits your case, because most firms need an add-on, a spreadsheet or a custom layer for reels. My inventory management guide covers the next step up.

Can AI help a wire and cable distributor?

Yes. AI can read emailed purchase orders and match each line to your part numbers, and propose SKUs for spec-heavy quote requests. A person checks the exceptions, so a wrong gauge does not slip through.

More in this topic: B2B: choosing software by trade (10 guides) →

Sources

Ready for the next step?

A 30 minute call. If you do not need me, I will tell you.

Ranjit Bhinge You talk to me, Ranjit. I reply within a few hours.

Not sure what you need? Tell me what is going on. I will point you the right way, even if it is not me.

Blur Studio · 30 minute call

Book a 30 minute call

You talk to me, Ranjit. If you do not need me, I will tell you.

  • We talk about your business and what is going on.
  • You leave with a clear next step, even if it is not me.
  • I reply to every message within a few hours.
Loading the calendar…