Are your ad clicks from real target companies? How to check

By Ranjit Bhinge, founder of Blur Studio · Updated · 10 min read

Short answer: You check by matching who clicked against the list of companies you meant to reach. First tag every ad with campaign labels so your analytics can separate ad visits from other visits. Then compare those visits with your target list in one of three ways: the free way (form fills, email replies and asking new leads how they found you), a company-matching tool that guesses the visiting company from the visitor's internet address (IP address), or both. Treat every match as a clue, not proof. Ploy, an AI platform that builds and hosts business websites, offers matching for US visitors only.

Ranjit Bhinge

You pay for B2B ad clicks, but the report shows clicks, not companies. Here is a way to find out whether the right buyers are coming, and how much of your spend is wasted.

I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.

B2B means selling to other businesses. In B2B advertising, a click only matters if it comes from someone at a company you could sell to. Ad platforms report clicks and cost, not whether the person works at one of your 40 target companies. To answer that, you need three things: a written target list, ad links that carry labels, and a way to tell which company each visit came from. This page gives you a method that costs nothing to start, and shows where a paid tool such as Ploy can help and where it cannot.

The cost of not checking is plain. Buyers read your site, leave without a trace, and you keep paying for similar clicks. This page is about checking the audience. If the right people arrive but do not act, read why ad clicks do not convert instead.

This page may contain affiliate links from which Blur Studio earns commissions.

What you can and cannot learn

Be clear about the limit first. Company matching works from the visitor's IP address, the number that identifies a network connection. A match tells you who owns the network, and a company office network is a good match for that company. A person working from home or on a VPN (a service that routes traffic through another network) shows up as an internet provider or the VPN company, not their employer. No neutral accuracy figure exists for this matching. Every match rate you see is a vendor claim: RB2B's pricing page shows 15 to 20 percent coverage on its Free, Starter and Pro plans and 35 to 45 percent on Pro+, and a Leadfeeder post has reported 38.0 percent across five regions (check the vendor). Test on your own traffic before you trust any of them.

Also, Google Analytics 4 (GA4, Google's free traffic tool) is built to report on groups of visitors. Its standard reports do not name the visiting company, and Google applies thresholds that hide rows with very few users. So GA4 tells you how many ad visits arrived and what they did, and a second source has to tell you who they were.

Step 1: write the target list

Make a sheet with one row per company: name, website address, why they fit, and a status column. Add any parent company or brand names buyers might use. If you cannot write the list, you cannot check the ads, because you have no definition of "real target company". Keep it short enough to work by hand: 20 to 100 accounts is typical.

A short list has one more consequence. Ad platforms need minimum sizes before they will show ads to a list. LinkedIn (the professional network, whose ads can target uploaded company lists) says on its company list help page that you need at least 300 rows to upload one, the list must match at least 300 member accounts to be used in an active ad set, and it recommends 1,000 or more companies. Google Ads' Customer Match page (Customer Match lets you upload your own contact list to target ads) says at least 100 members must be added or updated within the window to keep a list eligible, and that ads reach matched users when they are signed in to Google. A list of 40 companies cannot run on either as a list. That does not stop you checking: you run broader ads and then check who clicked. For tiny lists, direct outreach plus a page made for each account (see account-based marketing pages) often beats ads.

Step 2: tag every ad

A UTM tag is a label added to the end of a web address, such as utm_campaign=q4_cfo_list. Google's guidance is to always use utm_source, utm_medium and utm_campaign. Values are case sensitive, so use lowercase, one source per platform and one medium per channel. If a value is missing, your reports show "(not set)". Use one naming sheet and never improvise.

FieldRuleExample
utm_sourceThe platform, lowercaselinkedin
utm_mediumThe channel typepaid_social
utm_campaignAudience plus offer plus monthfinance_leaders_audit_nov
utm_contentThe ad versionvideo_a

Send each ad group to its own landing page where you can, so one page equals one audience.

Step 3: compare clicks with sessions

In GA4, open the Landing page report and filter by your campaign. Compare the ad platform's click count with GA4's session count for the same dates. Some gap is normal, because people close the tab before the page loads and some visitors block tracking scripts. GA4 also drops known bot traffic automatically, and Google says you cannot turn this off or see how much it removed. A big gap that grows over time, or sessions with a one-second average, points to wrong taps, bots or a slow page. Fix that before you judge the audience.

Step 4: find the companies behind the visits

Here are your options, from least to most effort.

OptionWhat it showsCost as of November 2026
No tool: form fills, replies, "how did you find us?"Companies that raised their handFree (your time)
GA4 and Google Search Console (Google's free tool showing which searches bring visitors)Volume, pages, campaigns. Not company names.Free
Leadfeeder (Dealfront), software that matches visits to companiesCompany names. Free Lite plan shows the last 100 companies a month with 7 days of history.Lite EUR 0; Discover from EUR 79 a month billed annually (EUR 113 monthly), rising with companies identified. Check the vendor page.
RB2B, a US tool that identifies visitorsFree plan: company level only, 150 resolutions a month, sent to Slack (a workplace chat app) only. Person level is US only on paid plans.Free $0; Starter $79 a month; Pro from $149; Pro+ from $199 (prices rise with volume)
PloyCompanies and people for US visitors who accept cookies. Starter 50 and Pro 1,000 identifications a month.Free $0, Starter $50 a month, Pro $300 a month, Enterprise by quote

A "resolution" is RB2B's word for one identification. Compare how each vendor counts before you compare prices.

Start with the free row. Ask every new lead in the first call or the form: "How did you hear about us?" Add a short drop-down to the form with your ad sources. Then check whether form fills came from target companies. This catches what matching tools miss, such as the person who clicked from a phone on home wifi.

Where Ploy fits, as one option

Ploy's docs say it identifies, for visitors who accept cookies, the companies and people visiting a Ploy site, showing name when available, company, job title, LinkedIn link, visit count and pages viewed, and that it can sync matches to a CRM (customer relationship management tool). The facts that matter for an ad check:

  • Per Ploy's feature pages, net-new identification covers visitors in the US only, and for EU and UK visitors Ploy says it does not collect or share net-new anonymous visitor data. If your target companies are outside the US, Ploy will not tell you who clicked.
  • It only identifies visitors who accept cookies, or visitors on sites that report no choice. Refusals are never matched. So the match list is always a subset of your visits.
  • Each identification uses one visitor-enrichment credit. Starter has 50 a month and Pro has 1,000. With 50 a month you can check at most 50 visits, which is too few to judge a campaign with 1,000 clicks. The Free plan has none. Credits do not roll over.
  • Ploy publishes no match rate. Run your own test.
  • Your site has to run on Ploy for this to work. If you only want the check, you do not need to move a whole site for it.

Ploy's ad products are on waitlists as of November 2026, so none of its ad features exist to use today. What exists is the web product: site building, analytics, forms and visitor identification. If you want to try it, Ploy has a free plan without credit-card sign-up, though visitor identification needs a paid plan. For a head-to-head against a specialist, read Ploy vs RB2B and Ploy vs Warmly and Leadfeeder.

Step 5: match the visits to your list and sort them

Take the list of companies the tool found and put each one in a bucket by hand. Never act on a bulk match.

BucketWhat it meansWhat to do
A: on the target listThe ad reached who you wantedSend a personal follow-up through a channel you are allowed to use
B: fits your profile, not on the listGood audience, list may be too narrowConsider adding to the list
C: wrong typeAgencies, ad vendors, students, job seekers, your own staffExclude from targeting where the platform allows
D: cannot tellInternet providers, mobile networks, VPNsIgnore. Do not count them for or against the campaign.

Worked example with made-up numbers

All numbers below are invented to show the arithmetic. A software firm has a target list of 40 companies and spends $4,000 in a month on ads. The ad platform reports 1,000 clicks. GA4 shows 880 sessions. A matching tool identifies 20 percent of sessions, which is 176 visits.

BucketVisitsShare of identified visits
A: target list (9 of the 40 companies)2112 percent
B: fits profile, not on list3822 percent
C: wrong type6034 percent
D: cannot tell5732 percent

The arithmetic: $4,000 divided by 21 target-company visits is about $190 per visit. Divided by 9 target companies reached, it is about $444 per company. Bucket C is the waste: 60 of the 176 identified visits. The firm tightens targeting, adds exclusions and reruns for a month. Because only 20 percent of visits were identified, never scale these counts up to all 880 sessions. They are a sample.

Test plan with pass and fail rules

This is my rule of thumb, not an industry benchmark. Run the check for a full month or at least 300 clicks, whichever is longer.

  1. Tracking test: click one of your own tagged ads from a phone and confirm GA4 records the campaign. Fail means fix tags first.
  2. Match test: pick five visits from known customers. Pass if the tool names at least some of them correctly. Fail on most means the tool does not see your traffic.
  3. Quality test: after a month, compute bucket A as a share of identified visits. Under 10 percent with several weeks of data means change the targeting. Over 25 percent means keep going.
  4. Human test: did any bucket A company fill in a form, reply to an email or book a call? No contact after two months means the page or offer needs work, not the audience.

Privacy, and who should skip a matching tool

Matching visits to companies and people is regulated differently by place. This is information, not legal advice. Check local law, and read is it legal to identify website visitors before you contact anyone you identified. Check RB2B's and Ploy's own privacy pages for what they ask customers to do outside the US.

Skip a matching tool when:

  • You have fewer than a few hundred ad clicks a month. There is nothing to sample.
  • Your buyers are mostly outside the US and you were hoping Ploy's person-level matching would cover them.
  • Your buyers work from home or on mobile. Company names will mostly come out as providers.
  • You cannot act on a match. If nobody follows up within days, the data only adds cost. See who is visiting my website for the free alternatives.

How I'd approach this

I would start free. Week one: write the target list, apply the UTM table to every ad, add a "how did you hear about us" field to the form, and compare clicks with sessions in GA4. Week two: if you have at least 300 clicks and a reason to act on company names, try the free tier of one matching tool and check five known visits. Weeks three and four: sort buckets by hand and change one thing in the targeting.

Decision rule: pay for a tool only if the free checks leave a question you can name, and the tool covers where your buyers are. If your site is on Ploy anyway, its visitor identification is a reasonable first test for US visitors on a paid plan. If you want a custom lead system or a portal that records which account saw which page, Blur Studio builds the custom version, including CRM connections and ongoing care of the tracking setup: see what that includes.

Related guide: Tailored Pitch Pages for Agency Leads: Options and Costs.

Related guide: How to Turn a Proposal Into an Executive Briefing Web Page.

Related guide: How to Get Website Visitors Into HubSpot.

Related guide: How Distributors Can Compare Competitor Offers and Write Sharper Ads.

I'm not a lawyer, accountant or other licensed adviser, and this page is general information, not advice. Rules and prices differ by country and change often, so treat it as a direction to think along, and please check with a lawyer or the relevant regulator before you act on it.

Questions people ask

Can Google Analytics tell me which companies clicked my ads?

Not by name in its standard reports. GA4 shows volumes, pages and campaigns, and it hides rows with too few users. To see company names you need a separate matching tool or your own form data.

How accurate is matching a visit to a company?

No neutral figure exists. Vendors publish their own match rates, from about 15 to 20 percent on RB2B's pricing page to 38 percent in a Leadfeeder post, and all of them are claims. Home workers and VPN users often show up as providers. Test on your own traffic.

Can I upload my 40 target companies to LinkedIn and run ads only to them?

LinkedIn's help page says a company list needs at least 300 rows to upload and at least 300 matched member accounts to be used in an active ad set. A list of 40 falls short. Run broader ads and check who clicked, or reach those accounts directly.

What does Google Customer Match need?

Google's help page says a list needs at least 100 members added or updated in the window to stay eligible, and matched users must be signed in to Google. Check the current page for spend and history rules.

Does Ploy show which companies clicked my ads?

Ploy's visitor identification covers US visitors who accept cookies, on a Ploy-hosted site, using enrichment credits (50 a month on Starter, 1,000 on Pro). Ploy's ad features are on waitlists as of November 2026, so ad reporting is not available to use.

How many ad clicks do I need before this check is worth doing?

I would want at least 300 clicks across a month. Below that, the sample is too small to judge. Use form fills, replies and "how did you hear about us" answers instead.

Is it legal to identify companies that visit my site?

It depends on where the visitor is and what you do next. Company-level matching is treated differently from person-level matching, and an IP address can still count as personal data in some places. Check local law and read our guide on identifying website visitors.

More in this topic: Websites: finding and following up B2B visitors (6 guides) →

Sources

Ready for the next step?

A 30 minute call. If you do not need me, I will tell you.

Ranjit Bhinge You talk to me, Ranjit. I reply within a few hours.

Not sure what you need? Tell me what is going on. I will point you the right way, even if it is not me.

Blur Studio · 30 minute call

Book a 30 minute call

You talk to me, Ranjit. If you do not need me, I will tell you.

  • We talk about your business and what is going on.
  • You leave with a clear next step, even if it is not me.
  • I reply to every message within a few hours.
Loading the calendar…