Which software suits an industrial parts or plumbing supply distributor, and what is usually missing?

By Ranjit Bhinge, founder of Blur Studio · Updated · 6 min read

Short answer: Industrial and plumbing supply distributors usually run a distribution ERP (the main software for orders, stock, purchasing and invoices) such as Epicor Eclipse, Epicor Prophet 21, Infor CloudSuite Distribution, Acumatica or NetSuite. Epicor says Eclipse is built for electrical, plumbing, HVAC and pipe, valve and fitting distributors. Most vendors quote prices only after a demo; Acumatica is the exception, with a starting price it publishes (about USD 1,495 a month as of November 2026, for a package with support and implementation; its own pages word it slightly differently, so confirm the figure). What these systems tend to leave open is contractor-friendly quoting, a clean online catalog, and reading emailed orders.

Ranjit Bhinge

You sell parts, pipe or fittings to contractors and plants, and you want to know which system fits a counter-and-delivery business and what you will still be doing by hand.

I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.

What industrial distribution is, in plain words

The University of Nebraska at Kearney describes industrial distribution as moving industrial goods from manufacturers through the wholesale supply chain to the businesses that use them. The distributor sits in the middle: it buys in bulk, stocks a wide range, and sells and delivers in smaller lots. The same school cites the National Association of Wholesale Distributors as estimating that the industry includes over 30,000 companies with over $7.4 trillion in annual revenue. For more detail, see fastener distributor software.

Plumbing supply is a close cousin. It adds a showroom, contractors who buy by the job, and staged deliveries. The software questions are similar, with a few extra.

What to judge any system by

  • Counter speed. A contractor at the counter will not wait. Entry, pricing and card payment need to be fast.
  • Customer pricing. Contract rates, quantity breaks and promotions. See customer-specific pricing.
  • Job and bid handling. Quote a whole job, then release materials in stages.
  • Delivery tools. Proof of delivery, routes, notes.
  • Rebates. Supplier rebates (money back from a supplier once you hit a volume) tracked automatically.
  • EDI. Electronic data interchange, the machine-to-machine format some buyers and suppliers use. Check whether it is included or an extra.
  • Stock control. Reorder points (the stock level that triggers a purchase), cycle counts, dead stock. See inventory management systems.

The systems side by side

SystemWhat it isWhat the vendor saysPrice
Epicor EclipseA distribution ERP from EpicorBuilt for electrical, plumbing, HVAC and pipe, valve and fitting distributors, with front counter, work queues, job management, forecasting, EDI and contract pricingNot published
Epicor Prophet 21Epicor's other distribution ERPEpicor markets it to wholesale distributors, including fastener distributors; ask Epicor how it differs from Eclipse for your tradeNot published
Infor CloudSuite DistributionA cloud ERP suite from InforSays it serves distributors of any size, including industrial supplies and plumbing and HVAC, with add-ons for forecasting, warehouse management, B2B ecommerce and quotingNot published
AcumaticaA cloud ERP with a distribution editionLot and serial tracking, kits, reorder point and safety stock planning, role-based dashboards, prebuilt connectors for ecommerce, EDI and shippingStarting price about USD 1,495 a month as of November 2026, for a customized package with support and implementation, per its distribution page (confirm the exact figure with Acumatica)
NetSuiteA cloud ERP from OracleMulti-warehouse inventory, complex pricing, credit limits and holds, rebates and landed cost trackingAnnual subscription: core platform, optional modules, number of users, plus a one-time implementation fee. No price published

For plumbing in particular, Epicor's plumbing page lists order and pricing management, counter sales with signature capture, kits and companion items, lot billing and release scheduling for projects, mobile proof of delivery, vendor rebate tracking, and EDI it describes as built in, with no third-party software needed. Epicor also says Eclipse, which it markets for electrical, plumbing, HVAC and pipe distributors, includes warehouse management and a multi-carrier shipping tool called Epicor Quick Ship.

These are the vendors' claims. Your job in a demo is to see them work with your data. Ask Epicor how Eclipse and Prophet 21 differ for your trade, since both are listed in its distribution range. For more detail, see Epicor Eclipse versus Prophet 21.

What the vendors' pages add on pricing and features

Acumatica's pricing page says its cost rests mainly on the number of applications you use, on the resources you need for your transaction volume and storage, and on the deployment option you choose. It markets unlimited users, so you are not paying per seat. For a counter business with many part-time staff that matters, because a per-user price grows with every extra login while an application-based price does not. Its distribution page adds lot and serial tracking, matrix inventory (one item in many sizes or finishes), kits, zone-based picking and mobile barcode scanning, plus demand planning with reorder points, safety stock and distribution requirements planning (working out what to move between warehouses). It lists B2B web storefronts and a BigCommerce company-account sync.

Infor lists the same trade needs on its distribution page. For plumbing and HVAC it names complex pricing, high-volume order processing, supplier rebate management, and warranty and claims management. For industrial supplies it names complex pricing, supplier rebates, product complexity management and rentals. It sells B2B ecommerce (Rhythm for Commerce, with prices and stock read live from the ERP), a quoting tool (Infor CPQ) and a flat-fee AI package, Infor Velocity Suite, that goes with any of its suites. Infor says more than 4,000 distribution companies run on it, which is a vendor figure, so ask for references in your own trade and size.

On the size of the industry, the National Association of Wholesaler-Distributors (NAW) describes it as an $8.7 trillion industry supporting more than 6 million jobs, which is higher than the older figure the university page cites. The point for you is only that you are buying in a crowded market, so make vendors compete on your trade, not on a general pitch.

A worked check, with made-up numbers: a counter team of 15 and a vendor that charges per user means 15 logins to budget, plus extra for the drivers who need proof-of-delivery access. Ask each vendor to price your real count of counter, warehouse, driver and office users for three years, and write the answers side by side so the pricing models can be compared.

What is usually missing

I have yet to see a distributor of this size whose ERP covered everything it wanted. These are the usual gaps.

  • Quoting for contractors. A quote on a job with 200 lines, substitutions and a few price levels is slow in most ERPs. See CPQ for distributors (CPQ means configure, price, quote).
  • A contractor portal. A login where a contractor sees their own prices, past orders, open quotes and invoices. See client portals. Epicor and NetSuite both describe ecommerce or self-service tools; ask each whether they cost extra.
  • Online search that works. A buyer who knows "3/4 inch brass ball valve" but not your part number needs a catalog that understands that.
  • Emailed orders. Contractors still send lists by email and text. Someone types them in. See email order processing.
  • Odd reports. The report you actually want, such as margin by contractor by job, often needs an export to a spreadsheet.

Where AI fits

The nearest-term use is order and quote entry. Proton.ai, a company that sells AI quote and order entry to distributors, says its tool reads emails, PDFs, spreadsheets, photos and voicemail, matches vague descriptions and competitor part numbers, applies contract pricing, and flags low-confidence lines for a rep to check. The page shows a quote saved to Prophet 21. The page gives no price. Epicor says it is adding AI to Eclipse, and Acumatica has an AI Assistant that answers plain-language questions about your ERP data. Treat all of these as things to test, not promises. See AI order entry for distributors.

Replace the ERP, or build on top of it

A new ERP is a large project, and Epicor's own pages say a poor-fit system needs constant and expensive customization. If your ERP handles stock, invoices and pricing acceptably, replacing it to fix quoting and orders is the expensive route. The cheaper route is to leave it as the record of truth and add a layer in front: a quote tool, a portal and an order reader that write back to it. A custom ERP is a third path when no ready-made system fits. See custom ERP for when that makes sense.

How I'd approach this

List the five tasks your office repeats most. Quote entry, order typing, price updates, delivery paperwork and rebate claims are common. Count the hours each takes in a normal week.

Then ask one question: is the pain inside the ERP, or around it? If your ERP cannot do counter sales, lots, or rebates at all, shortlist two systems from the table and demo them with a day of your real orders. If the pain is quoting, the portal and orders, fix those around what you have first. In either case ask every vendor for a written quote listing modules, users, setup, training and support. Quote the total for three years, not the first month.

Questions people ask

What software do industrial distributors use?

Most use a distribution ERP such as Epicor Eclipse or Prophet 21, Infor CloudSuite Distribution, Acumatica or NetSuite. Pick by running a demo with your own items, customers and prices, not the vendor's sample data.

What is the best software for plumbing supply distributors?

Epicor has a plumbing distribution page and lists Eclipse for plumbing, electrical, HVAC and pipe, valve and fitting distributors. Compare it with other ERPs on counter speed, contract pricing, kits, project billing, delivery tools and total cost.

How much does industrial distributor software cost?

Most vendors quote after a demo. Acumatica's distribution page shows a starting price of about USD 1,495 a month as of November 2026, with support and implementation included, for a customized package (Acumatica's pages word the figure slightly differently, so confirm it). NetSuite says its fee has three parts (core platform, modules, users) plus a one-time implementation fee. Get written quotes for the same scope.

Can I add a customer portal to my existing ERP?

Usually yes. A portal reads prices, stock and order history from the ERP through its API and shows them to customers. See client portals and custom ERP for the options.

Does industrial distributor software include AI?

Some vendors are adding it. Epicor says it is adding AI to Eclipse and Acumatica lists an AI Assistant for questions about your data. Ask which licence includes it and how it handles your pricing data.

More in this topic: B2B: choosing software by trade (10 guides) →

Sources

Ready for the next step?

A 30 minute call. If you do not need me, I will tell you.

Ranjit Bhinge You talk to me, Ranjit. I reply within a few hours.

Not sure what you need? Tell me what is going on. I will point you the right way, even if it is not me.

Blur Studio · 30 minute call

Book a 30 minute call

You talk to me, Ranjit. If you do not need me, I will tell you.

  • We talk about your business and what is going on.
  • You leave with a clear next step, even if it is not me.
  • I reply to every message within a few hours.
Loading the calendar…