How much does property management software cost per month?
Short answer: Most property management software is priced per unit (one rentable door) per month, and published starting rates run from about $1 to $5 per unit, as of November 2026. At 100 doors, those starting rates work out to roughly $100 to $500 a month for the base system, before minimum spend. The base price is rarely the final bill. Payment fees, tenant screening, e-signatures, phone numbers and AI or call-handling add-ons come on top, so price the whole stack, not just the plan.
You run a property management company and want the real monthly cost of software at your door count, including the fees that never show up on the plan page.
I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.
What do the main tools charge?
Property management software, often called a PMS, is the system that holds your rent roll (the list of units, tenants and rents), collects rent, tracks maintenance and keeps the books. Almost every vendor charges per unit per month, often with a minimum. Here are the starting prices from each vendor's own page as of November 2026. If a free or low-cost landlord tool is tempting, TurboTenant versus Buildium shows where each fits.
| Tool | What it is | Published starting price | Watch for |
|---|---|---|---|
| Yardi Breeze | Cloud system from Yardi | $1 per unit, $100 monthly minimum, based on an annual agreement. Premier is $1 per unit when bundled with Yardi's screening and renters insurance on a 12-month contract, $2 otherwise, with a $400 monthly minimum | Premier shows "terms and minimums apply". See my Yardi Breeze pricing breakdown |
| AppFolio | Cloud system sold in Core, Plus and Max plans | Core from $1.49 per unit. Plus from $3.20. Max from $5.00 | Core has a 50 unit minimum, and minimum spend applies. Quote only |
| Buildium | Cloud system for rentals and community associations | Essential from $65 a month. Growth from $202. Premium from $420 | Per-transaction fees for screening, e-signatures and payments vary by plan |
| DoorLoop | Cloud system with a built-in AI assistant, plus AI agents on the higher plans | On yearly billing: One from $2.50 per unit, as low as $1.50 per unit above 100. Connect from $4.00. Multiply from $5.00 (invite only) | Monthly billing costs more: One is $3.00 and Connect is $4.80. Minimum spend and units apply. Screening is $35 each |
| Rentec Direct | Cloud software with landlord and property manager editions | Starter $25 a month flat. Pro and PM from $50 a month on the price cards, rising with units | PM adds trust accounting and owner payments |
| TenantCloud | Landlord-focused software with plans capped by lease count | Starter $25, Growth $35, Pro $60, Business from $100 a month on monthly billing. Yearly billing is lower, from $15 a month for Starter | Leases capped at 10, 30 and 60 on the first three plans |
| Hemlane | Software plus optional repair and tenant placement services | Free Starter. Basic $2 per unit plus a $28 platform fee | Essential adds repair coordination at $20 per unit |
| Rent Manager | Software sold in bundles by quote | By quote. Basic is built for up to 100 units | Texting needs a registered, purchased number |
Two other names you will see for very small landlords are RentRedi, a flat-rate landlord app at $29.95 a month or $12 a month billed annually, and Innago, another landlord software, which shows no monthly fee, no setup fee and no contract. Both fit a landlord with a handful of doors more than a management company that holds owner money.
What does the base price come to at 100, 300 and 1,000 doors?
This table multiplies published starting rates by door count. It is plain arithmetic, not a quote. Real quotes add minimum spend and extras, and they usually land higher than the "starting at" number.
| Doors | Yardi Breeze | AppFolio Core (from $1.49) | DoorLoop One (yearly billing, best case) | Hemlane Basic ($28 plus $2 a unit) |
|---|---|---|---|---|
| 100 | $100 | $149 | $250 | $228 |
| 300 | $300 | $447 | $550 | $628 |
| 1,000 | $1,000 | $1,490 | $1,600 | $2,028 |
The DoorLoop column assumes the "as low as $1.50 per unit above 100" rate applies to every door past the first 100. Hemlane's page has its own unit calculator, so use it for your exact number. Buildium is left out because its page lists "starting at" monthly prices without a per-unit rate, so ask for a quote at your portfolio size.
The table also shows why per-unit tools get cheaper per door as you grow, and why "cheapest" depends on your size. Yardi Breeze lists one per-unit rate. DoorLoop's drops after 100. Flat plans such as Rentec Starter at $25 a month look cheapest, but Starter stops at 10 properties.
What fees sit on top of the plan?
This is where the true cost hides. Here are published fees from Buildium, DoorLoop and Rentec Direct that show the pattern.
- Rent payments. ACH is the bank-to-bank transfer most tenants use. Buildium's incoming ACH is $2.35 per payment on Essential, $1.35 on Growth, and free for 12 months then $0.60 on Premium. DoorLoop charges $1.50 on One and shows free incoming ACH on Connect and Multiply. Rentec Direct's Pro and PM editions include one free incoming ACH per property each month, with extra payments at $0.50. Card payments run 2.99% on Buildium and 2.95% to 3.50% on Rentec.
- Tenant screening. Buildium lists $17 per screening, or $35 when the applicant pays. DoorLoop lists $35. Rentec Direct shows $10 to $18 per report on Pro and PM, depending on the package. Hemlane lists $40 total, paid by the tenant. TenantCloud lists screening as free to the landlord when the applicant pays.
- E-signatures. Buildium charges $5 per document on Essential and $1 on Growth. Premium includes it. DoorLoop includes unlimited e-signatures.
- Bank account setup. Buildium charges $99 per business bank account on Essential. That can add up when each owner has their own trust account (an account that holds owner and tenant money separately from yours).
- Property inspections. Buildium's Essential plan lists a $99 setup fee and a $40 to $95 monthly fee for property inspections. Growth and Premium list the fees as included.
- Phone numbers and texting. Rent Manager says texting needs a registered, purchased phone number. LeadSimple, covered below, charges per extra number.
Whether you or the tenant pays a payment or screening fee is a business choice, and the rules differ by state. Check your state's rules or ask a local attorney before you pass any fee to a tenant.
What does the add-on stack look like?
Most management firms end up with the PMS plus two to four add-ons. These are the usual ones, with a published price where I could read one.
- Owner lead and workflow tool. LeadSimple, a CRM and process tool for property managers, starts at $199 a month for 50 doors on its month-to-month plan, with extra doors from $2.49 each. See my LeadSimple review.
- Maintenance coordination. Latchel, a service that runs maintenance intake and an AI call center, is flat per door and priced by quote. See Latchel pricing explained.
- After-hours calls. A property management answering service or AI phone line, often billed by the minute or by the call.
- Accounting. Many firms keep QuickBooks, a general accounting program, beside the PMS. My guide to property management software vs QuickBooks covers when that makes sense.
- Signature and document tools. Covered in best e-signature for property managers and landlords.
Made-up example. Take a firm with 150 doors. It uses DoorLoop One at about $325 a month on yearly billing, if the lower rate above 100 applies. It adds LeadSimple One on a 12-month term at $169 plus 100 extra doors at $1.99, which is $368 a month. Its stack is now $693 a month, or $8,316 a year, before payment fees, screening and any maintenance service. That is $4.62 per door per month, almost double the DoorLoop sticker price of $2.17.
How do TenantCloud and DoorLoop compare?
People often search for this pair because they look alike on a price chart. They are built for different firms.
- TenantCloud charges a flat plan price and caps leases: 10 on Starter, 30 on Growth and 60 on Pro. Business starts at $100 a month for larger portfolios and adds team management. It fits an owner-operator with a small portfolio.
- DoorLoop charges per unit with unlimited users and unlimited document storage on every plan, and includes owner and tenant portals. It fits a company that has staff and owners to report to.
If you hold other people's money, check that your system supports separate trust accounting. Rentec Direct markets this on its PM edition. Ask every vendor the same question and get the answer in writing.
When does a higher tier pay off?
- Payment-heavy portfolios. If 150 tenants pay by ACH, Buildium's incoming fee works out to $352.50 a month on Essential and $202.50 on Growth. At that volume the higher tier can pay for itself on fees alone, if you absorb the fee. If tenants pay it, the saving is theirs.
- Tight staff. If a tier carries features that replace a part-time hire, such as bill scanning or workflow automation, price the hours, not the plan.
- AI features. DoorLoop's Connect plan, from $4.00 per unit on yearly billing, adds an AI receptionist that answers tenant texts, calls and portal messages. That costs $1.50 per unit more than One at the start. If after-hours calls are your biggest pain, compare that with a separate answering service before you commit.
For a wider look at how these systems differ beyond price, see my guide to property management software, and the head-to-head Buildium vs AppFolio.
When does building on top of your system make sense?
Often the right fix is not a new system. It is a small tool that sits on top of the one you have and does one job well, such as a maintenance request form that sorts urgency, or an owner report that pulls from your rent roll. That can cost less than an add-on that charges per door forever, and you own it. My guide to custom software development cost shows realistic price ranges, so you can compare a one-time build with a per-door fee that runs for years.
How I'd approach this
- Count your doors and write down what you want in 12 months. A system that is cheap at 100 doors can be costly at 400.
- Make a list of every fee you pay today: payments, screening, signatures, phone, after-hours help, bookkeeping. Add them up per door.
- Ask two or three vendors for a written quote at your door count with those same items priced in. Do not compare a "from" price to a quote.
- Decide who pays for screening and payment fees, and check your state's rules before you charge a tenant for anything.
- Run a real month of rent and one owner statement during the trial, then count the hours you saved.
- Only then look at add-ons, and ask which of them a small custom tool could replace.
If I managed 150 doors today, I would pick the base system for its accounting and owner reports first, since those are the hardest things to move later. I would add a phone or maintenance service only when after-hours calls were costing me real money.
Questions people ask
How much does property management software cost for a small company?
Published base prices run from a free Hemlane Starter plan and $25 a month on Rentec Starter up to roughly $250 a month for 100 doors on DoorLoop One with yearly billing, as of November 2026. Yardi Breeze is $100 a month at 100 units. Payment, screening and signature fees come on top. See the table above for the numbers at 100, 300 and 1,000 doors.
What does Rentec Direct pricing look like?
Rentec Starter is a flat $25 a month for 10 or fewer properties. Rentec Pro and Rentec PM both show $50 a month on the price cards and rise with unit count, and PM adds trust accounting and owner payments by ACH. Pro and PM include one free incoming ACH per active property each month. Use the unit slider on Rentec's pricing page for your exact number.
What does TenantCloud cost?
Monthly prices are Starter $25, Growth $35 and Pro $60, with Business starting at $100. Yearly billing lowers each one, to $15, $29 and $50 a month. The plans cap the number of leases at 10, 30 and 60, so check your portfolio against the cap before you pick a plan.
What does Hemlane cost?
Hemlane lists a free Starter plan. Basic is $2 per unit, Essential is $20 per unit and Complete is $58 per unit, and each adds a $28 platform fee. Essential and Complete add repair coordination and management help. Hemlane's page has a unit calculator, so enter your own count.
Why is my real bill higher than the plan price?
Because the plan covers the software, and fees apply to what flows through it: rent payments, tenant screening, e-signatures, extra bank accounts, phone numbers and any call or maintenance service. Add those to the per-unit price before comparing tools. My property management software guide explains what to ask each vendor.
Is it cheaper to build my own property management tool?
Not for the whole system. Accounting, trust handling and payments are hard to build and risky to get wrong. A small custom tool for one job, such as maintenance triage or owner reporting, can cost less over time than a per-door add-on. See custom software development cost for realistic ranges.
More in this topic: US property management: pricing and reviews (8 guides) →
Sources
- AppFolio pricing (AppFolio)
- Buildium pricing (Buildium)
- DoorLoop pricing (DoorLoop)
- Yardi Breeze pricing (Yardi)
- Yardi Breeze pricing blog (Yardi)
- Rentec Direct pricing (Rentec Direct)
- TenantCloud pricing (TenantCloud)
- Hemlane pricing (Hemlane)
- Rent Manager bundles (Rent Manager)
- RentRedi pricing (RentRedi)
- Innago pricing (Innago)
- LeadSimple pricing (LeadSimple)