Enquiries come in through my website form and half of them never get a reply. How do I fix that?
Short answer: Most enquiries go unanswered because the form sends an email to a shared address and nobody owns it. The fix has four parts: a form that collects what you need, an instant confirmation to the sender, an alert to one named person, and a lead log with a follow up schedule and a weekly check on anything unanswered. A lead log is just a spreadsheet or CRM (customer relationship management tool) where every enquiry has a row, an owner and a status. You can build all of it in an afternoon with tools you likely have.
Your website form does get enquiries, but you suspect half of them sit in an inbox until the person has gone elsewhere.
I'm Ranjit, and I run Blur Studio: 15+ years building software, 120 apps taken live, and clients who have gone on to raise $10M+. I build AI systems and processes that help businesses do a lot more with a lot less time. I also work differently from most of what else is out there, more on that further down this page. Say hello.
Why half your enquiries go cold
When I look at a small firm that says "half our enquiries never get a reply," it is rarely laziness. It is usually one of these:
- The form emails
info@and three people assume somebody else has it. - The email lands in spam or a promotions tab.
- Nobody knows which enquiries are already handled, so people hesitate to reply in case they double up.
- The form asks for too little, so the first reply is a string of questions, and the sender never answers.
- Someone replied once, then nothing, because there was no follow up plan.
Every one of these is a process gap, not a software gap. Software only helps once the process is written down. Start there.
The four parts of the build
- A form that collects the right things (the intake).
- An instant confirmation to the sender.
- An alert to one owner, with a backup.
- A lead log and follow up schedule, plus a weekly check.
Step 1: Fix the intake form
A lead intake form is the form that captures a new enquiry. Keep it short, but not so short that your first reply has to ask everything again. Five to seven fields is usually right:
- Name
- Email and phone (ask how they prefer to be contacted)
- What they need, in a free text box
- One or two qualifying questions specific to your work, such as "Which suburb?", "Roughly when do you need this?" or "Approximate budget range"
- A consent line, such as "By sending this you agree we may email or text you about this enquiry."
Make the qualifying questions dropdowns where you can. Dropdown answers go cleanly into a spreadsheet and let you sort urgent from not urgent. If you want to go further, qualifying leads with a short quiz shows how. Do not ask for sensitive data (health, financial account numbers, ID numbers) on a general enquiry form. The FTC's guide for businesses on protecting personal information says to keep only what you have a legitimate need for, and for only as long as you need it.
Step 2: Send every answer to a lead log
The simplest lead log is a Google Sheet. If you use Google Forms, you can link the form to a sheet with the "Select destination for responses" option in the form's responses settings. If your website builder has its own form, most can send entries to a sheet through a connector tool such as Zapier, a service that moves data between apps. Zapier's free plan includes 100 tasks a month, and its Professional plan starts at $19.99 a month billed yearly for 750 tasks (as of November 2026; check the live pricing page).
Add these columns to the sheet beyond the form answers:
| Column | What goes in it |
|---|---|
| Received | Date and time (the form fills this) |
| Owner | Who is responsible for the reply |
| Status | New, Replied, Quote sent, Won, Lost, Not a fit |
| First reply sent | Date and time of the first human reply |
| Next action | What happens next, and by when |
A spreadsheet works fine up to a few hundred enquiries a year. Beyond that, or when several people work leads, a CRM is easier. HubSpot, a widely used CRM, has a free tier that allows up to 2 users and 1,000 contacts (as of November 2026). My guide to CRMs for small business compares the options in plain words. If your leads arrive by email rather than a form, adding emails to a lead spreadsheet shows how to catch those too.
Step 3: Send an instant confirmation
The confirmation tells the person their message arrived and what happens next. It also protects you: if someone says "I wrote to you and never heard back," you have a time stamp. Wording that works:
Hi Priya, thanks for getting in touch with Harbour Accounting. We have your message about setting up payroll. Jo will reply personally by 12pm tomorrow. If it is urgent, call 555-0142. Talk soon.
Keep it plain. Name the person, give a time you will actually meet, and give a phone number. Do not use a vague "we will be in touch shortly."
A confirmation that only acknowledges the enquiry is a service message, not marketing. Keep it that way. Do not add a sales pitch, a discount or a newsletter sign-up to it. The FTC's CAN-SPAM guide says commercial email must include a clear way to opt out, and the law has no exception for business-to-business email. Messages that confirm something the person asked for fall in a narrower category with fewer requirements.
Step 4: Alert one owner, with a backup
When a new row lands, send an alert to the owner by email, text or chat. Include the name, phone number, what they asked for and a link to the row. Do not send it to a group address.
Then add a timer. If the status is still "New" after a set time, say 2 working hours, alert the backup. Most form tools, CRMs and connector tools can do this. For the owner rule itself, see my longer guide on building a speed to lead system, which covers who owns what, after hours handling and the text rules.
If calls and texts also arrive from the same prospects, route them into one place. A shared inbox for calls, texts and voicemails stops the same person being answered twice, or not at all.
Step 5: Set a follow up schedule
A fast first reply starts the conversation. The follow up wins it. Write a schedule and stick to it. A plain version:
| When | What |
|---|---|
| Within the promised time | Human reply with an answer or a call to book |
| Day 2 | One short nudge if they have not responded |
| Day 7 | A second nudge with something useful, such as an answer to a common question |
| Day 14 | A last, polite "should I close this out?" message |
After you send a quote, add a separate nudge. The guide to automatic follow ups three days after a quote gives the wording. For old enquiries that already went cold, bringing back lost leads and old proposals is the next stop.
Automation can send the day 2, 7 and 14 messages if you want. I suggest drafting them from fixed wording you approved and stopping the sequence the moment the person replies or the status changes. A follow up that arrives after the person has already booked is worse than none.
Where automatic qualification helps, and where it does not
Automatic lead qualification means sorting enquiries by how likely they are to become a job, using rules or AI. Simple rules work well: a dropdown that says "within 2 weeks" and a budget above your minimum goes to the top of the list. AI can read free text and sort it into types, such as quote request, existing client or sales pitch. The article on AI lead qualification goes through what is realistic.
A person should still read anything flagged as low priority before you ignore it. Rules and AI both misjudge. A short, badly written message can come from a very good client.
When a won enquiry needs a smooth start
A won lead should not drop into a void. If you onboard new clients with forms, contracts and documents, see client onboarding software so the handover from "enquiry" to "client" is as tidy as the first reply.
The weekly check on unanswered leads
This is what keeps the whole thing working. Every Monday, ten minutes:
- Filter the sheet for status "New" older than 1 working day. Reply to each one or mark it "Not a fit" with a reason.
- Filter for "Replied" with no next action. Give each one a date.
- Count enquiries last week, replies, and wins. Write the three numbers somewhere.
- Read two automatic messages that went out and check they still sound right.
If the "New older than a day" list is never empty, the problem is not the tool. It is capacity or ownership, and that is worth knowing.
Common mistakes
- Sending form emails to a group address. Send to a named person.
- Making the form too long. Every extra field costs you some enquiries.
- Building a six-email sequence on day one. Start with the confirmation, the alert and the weekly check. Add steps later.
- Not testing. Submit your own form from a phone and a laptop, with a Gmail address and a work address, and see what arrives and where.
- Letting the log rot. A status column nobody updates is worse than none.
How I'd approach this
I would build the smallest version first: a short form, a sheet, one confirmation and one alert to a named person. Run it for four weeks and do the Monday check every week. Only then add follow up messages, qualifying rules or a CRM, and only where the Monday check shows a real gap.
I would not buy a lead tool before I knew how many enquiries I get and how many go unanswered today. Count last month's enquiries by hand first. That number tells you whether you need a spreadsheet, a CRM or just a rule about who looks at the inbox.
If you would rather have it built and tested for you, with the form, log, alerts and wording set up around how your firm actually works, that is the kind of job I take on. Get in touch and bring your last month of enquiries.
Questions people ask
How do I send website form entries to a Google Sheet?
If you build the form in Google Forms, use the "Select destination for responses" option in the form's responses settings to link a sheet. For forms on other website builders, a connector such as Zapier can add each entry as a new row. See also adding emails to a lead spreadsheet.
How fast should I reply to a website enquiry?
Send an automatic confirmation straight away and a human reply within a few working hours at most, faster if you can. My speed to lead guide sets out a 5 to 15 minute target for a first human reply during working hours.
Is an automatic confirmation email legal without an unsubscribe link?
A message that simply confirms something the person just asked for generally falls in the narrower transactional category under the FTC's CAN-SPAM guidance, with fewer requirements. Adding promotion changes that. Rules differ by country, so ask a lawyer if you are unsure.
Do I need a CRM, or is a spreadsheet enough?
A spreadsheet is enough for a few hundred enquiries a year and one or two people. When several people work leads or you need reminders, a CRM helps. HubSpot's free tier allows 2 users and 1,000 contacts as of November 2026. See CRMs for small business.
Can AI qualify website leads for me?
It can sort and summarise enquiries and draft replies, but a person should check anything marked low priority or anything that quotes a price or a date. Read AI lead qualification for what is realistic.
What should I do with enquiries that went cold months ago?
Send a short, honest message to each, one at a time, with a reason to reply. The guide to bringing back lost leads and old proposals has wording and a simple process.
More in this topic: Problem solving: automating service business work (21 guides) →